Electric Unit Digital Iron Station Temperature Controller Kits for HAKKO T12 Handle DIY kits LED vibration switch Blue LED

Electric Unit Digital Station Temperature Controller Kits for HAKKO T12 Handle DIY kits w/ LED vibration switch and ABS shell and new 24v 4.5a power supply Please read the description before order! If you receive the product have any question,please contact with me before open a dispute!we will solve for you in our best! The kit is a DIY product, T12 tip will be different from the purchase, T12 tip can be used for HAKKO T12 handle, quality aurance, customers can rest aured to buy. We are the DIY kits, not kits produced by HAKKO. The new arrival tips have change new package!the product is the same,quality aurance! Note,This package is ABS plastic shell! If you choose Led Color, will it be a complete set! A + a case + the power unit! New arrival! Cliinto the following photo to have a see!

If you want the DIY Kits with alloy shell but without power supply,you can chiinto this photo Please read the description before order! OUR DIY kits have change new package ,but it is also the new 2017 new version,please don't worry about that! The Package listing as the main photo shows all diy kit，include the shell and power supply, the power suppply match the shell ,not need to change that to fit the shell. (But If you choice 24V 4.5A power supply switching transformer,the package only the part you choice not the DIY kits!) We will send T12 TT12-K and if you want other tin the following photo,you can left the meage for me!We will send that for you(instead of  the  standard T12-K tip)! If you want more extratips,you can cliinto the following photo! Note!!!English manual at the following bottom! Dear friend,this product is 2017 new version,the new arrival   board is Version F or G! Attention:Before the test machine, be sure to confirm the correct line, positive and negative, otherwise the heating core must be heated to red and burn,you can see the following  English manual ! New arrival discount wholesale tip: 5pcs/lot ,cliinto the photo and place the order,we will send the package you choice, or you can place the order and left meage for me the tips you want(the tips in the above picture) ! 2017 New version (4 color optional Blue, Green, Red, ) This product is a DIY Kits, buyers need to own welding. DIY risk, novice buy carefully, If it is man-made damage, we do not aume responsibility, Thank you for understanding. And the LED have 4 color: Blue,red,green,,you can choice the color you want! This item can use in T12 T2 T13 T15 heating core. auto sleep, ball bearing vibration. Blue light word. Diy Kits Descriptions: 1.  T12 digital temperature controller (vibration switch + LED + knob) Input voltage: 12V-24V Temperature adjustment range: 200C-450C Maximum Power: 75W 2. T12 Tshape-k 3. T2 / T12 handle (907 handle conversion) 4. T2 / T12 inner tube bracket kits 5. silicone 5 Core cable  , cable length: 100~110cm 6. station 5 core aviation plug 7.flux 8.the solder 9.ABS shell 10.220V to 24V 4.5A new power supply switching transformer 11.Other cable/acceories ( shows)

Question: the temperature does not correspond to reality, the display is 200 ° with and in fact the temperature of the tis 300 ° sec. Why is that?

Answer :see the following,change P03 and P07

Question:if thetemperature the value of several degrees - dozens of degrees of temperature jumping(our product temperature stability is plus or minus 10C) ,you can do this make temperature more stable,cheour manual step 5!

Controller setting mode:

(The default has been set, no special requirements, please do not set up a )

Pre and hold the encoder on does not move → start → enter the settings mode:

There are 12 menus available for setup,P00,P01,P02,P03,P04,P05,P06,P07,P08,P09,P10,P11.The digital display menu is 1.5 seconds,and then automatically displays the corresponding s of this menu,at the same time rotate left encoder is reduced,right is increase,Pre it and automatically save the currently set s.And then display the menu for 1.5 seconds, and then display the corresponding s of this menu, and so on. When all s are set to automatically enter the normal heating mode.

Because each set a to save once, so you can shut down at any time without having to set all the s (such as you just want to set P01, set P01 after you can shut down and then boot into normal mode)

Menu item:

P00: restore the default s (0 or 1, the default value of 0,0 for not recovering, 1 for the recovery)

P01: Operational amplifier gain (200 to 350 times, step 1, default 230)

P02: Operational amplifier offset voltage (0 ~ 250mV, step 2, the default value of 100, refers to the tto keep the room temperature operational amplifier inherent output voltage, according to my measurement this voltage varies greatly with temperature, different magnification Not the same, the higher the magnification, if you do not measure, please keep the default value)

P03: thermocouple ℃ / mV data (30 ~ 50, step 1, the default value of 41, refers to the thermocouple need to temperature how much voltage was increased by 1mV, according to the type of thermocouple self-calculation, if you do not understand, please keep Defaults)

P04: temperature adjustment step (0,1,2,5,10 degrees optional, 0 can lothe temperature)

P05: sleep time (how long don’t not move into sleep) (0 ~ 60 minutes, step 1, 0 is to forbidden the sleep function)

P06: Shutdown time (0 ~ 180 minutes, 0 ~ 30 step 1,30 ~ 180 step 10, 0 is forbidden shutdown function)

P07: temperature correction (+20 degrees, step 1) (due to NTC resistance in the chais, the station heat will lead to the detection of NTC temperature higher than room temperature, resulting in high temperature compensation of the thermocouple, temperature is not accurate,or other causes the temperature is not accurate.If you set the other s are correct value but the temperature is still high or low, you can use this correction.For example, to detect the displayed temperature is 20 degrees higher than the actual value of this Set to 20)

P08: wake mode (0,1, 0 in the shutdown mode can be rotated the encoder and also can shake the handle to wake up, 1 can only rotate the encoder wake up (Note: pre the encoder can not wake up, can only rotate) )

P09: temperature increase mode to increase the temperature to adjustable (20 degrees to 100 degrees adjustable, adjust the pace of 10 degrees)

P10: temperature to increase the duration to adjustable (adjustment range of 10 seconds to 250 seconds, adjust the step 5 seconds)

P11: setting mode Auto save and return to heating mode Function to active time adjustable (range 4 seconds to 60 seconds)

Installed Note: 1. Strictly reference shop tutorials, well insulated and grounded against static electricity. 2. Before power test, carefully chethe wiring is correct, whether Weld and short, full power test machine after confirmation. 3. connect 12-24V DC, if received more than 20V power supply,2017 new style product don't need to remove anything! 4. When you configure the power supply voltage and current requirements thelves refer to the following table: Power (third column) is determined by the voltage (first column), as long as the current reaches the minimum current (second column). Measuring Machine normal, lights and display status: 1. Unplugged T12 tip, turn the light flashed off, show SER, 1 seconds after the display 500. 2. T12 plug tip, boot light uniform flashing, indicating rapid heating from room temperature generally show the set temperature to rise, approaching the set temperature, strobe lights. Indicator is not flashing or intermittent fl, indicating that the ttemperature reaches the set temperature or alternating temperature compensation. When measuring machines on display digital bounce questions: Because with the new T12 tip, the tinside the heater did not burnt, it will be just a little jump start with warm, generally do not need special treatment, the natural use of 1-2 days basically not bounce up. If you need effective immediately, the general recommendations of the temperature to 350 ?-380 ?while heating to the point of tin head, burning off after 4-5 minutes, until the tto cool before you can reboot! (1 no action can be repeated 2-3 times) Package Contents 100% 1x As the the following picture shows  all diy kit

English manual

1) We accept , , TT. All major credit cards are accepted through secure payment proceor ESCROW.

2) Payment must be made within of order.

3) If you can't checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within .

1. You have 7 days to contact us and 30 days to return it from the date parts received. If item is in your poeion is more than 7 days, it is considered used and or replacement will not be accepted. And customer should be responsible for all the charges of returning and reshipping.

2. All return it must be in its conditions, including box and acceories. Men made defects are not guaranteed, such as broken, scratched and so on, shipping tracking number, specific reason for the return, and your po#.

1.Buyer's early confirmation will be highly appreciated after receiving the it.

2.Since your feedbais especially ant to our busine's development, we sincerely appreciate your positive feedbaif you are satisfied with our product and service. 1 minute to you ,extremely vital significance to us.

3.Please contact us before leaving any negative or neutral feedback. We will try our best to solve any probl.Thanks for your understanding!

Welcome to our store--- UG International Supply Store

Thank you for choose UG. We Will Be No.1 In China! We are an honest seller on Aliexpre.

As a manufacturer of electronic module, UG have been in busine more than 20 years, and therefor have wide experience in all the line we handle.

To Be No.1 Supplier Of Electronic Module In China !

All our it from our factory are with high quality.

If you have any probl, we are very glad that you can contact us.We will try our best to help you.Hoping to establish a long term cooperation with you.

Always Imitated, But Never Surpaed In China.

If You Other Supplier Price Lower Than Us, Quality Than Us, Please Let Us Know, We Are Going To Beat Them!

OEM Service Also Welcome!

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.