Electric Unit LED Digital Iron Station Temperature Controller DIY Kits use for HAKKO T12 Handle vibration switch tips SET 4

Electric Unit Digital Station Temperature Controller DIY Kits for HAKKO T12 Handle LED vibration switch T12 tips kits

Please read the description before order! The kit is a DIY product, T12 twill be different from the purchase, T12 tcan be used for HAKKO T12 handle, quality aurance, customers can rest aured to buy. We are the DIY kits, not kits produced by HAKKO. The new arrival tips have change new package!the product is the same, quality aurance! New arrival! Please read the description before order! The kit is a DIY product, T12 twill be different from the purchase, T12 tcan be used for HAKKO T12 handle, quality aurance, customers can rest aured to buy. We are the DIY kits, not kits produced by HAKKO. Problem of power:

If the product is no other use of the problem, the value of several degrees - dozens of degrees of temperature jumping are generally power probl, our manufacture use used genuine power,the proposed use of good quality brand manufacturers of genuine power like Taiwan genuine Mean Well power or power!

This product not include power supply, suggest that you try to use the T12 Power supply requirement like the photo i upload and recommended to try to use the power 19V-24V laptop switching power supply, printer supply or storage battery!

Note!!!English manual at the following bottom!

Please left meage for me the tyou want like the following photo,otherwise we will send the tips you choose like the photo! Note: Set 1 include 2 pcs T12 tip, Set 2 include 3 pcs T12 tip,Set 3 include 4 pcs T12 tip,Set 4 include 5 pcs T12 tip! Attention:Before the test machine, be sure to confirm the correct line, positive and negative, otherwise the heating core must be heated to red and burn! ( Detailed English manual is at the bottom!) This product not inclue the shell and power supply, if you want the alloy shell and our new 24v 4a power supply(it match the shell,not the 24v 4a 6a power supply ),you can choice that in addition or cliinto the following photo and place a new order! This product is a DIY Kits, buyers need to own welding. DIY risk, novice buy carefully, If it is man-made damage, we do not aume responsibility, Thank you for understanding. And the LED have 4 color: Blue,red,green,,you can choice the color you want! This item can use in T12 T2 T13 T15 heating core. auto sleep, ball bearing vibration. Blue light word.

Diy Kits Descriptions: 1. T12 digital temperature controller (vibration switch + LED + knob) Input voltage: 12V-24V Temperature adjustment range: 200C-450C Maximum Power: 75W 2.due to the set you choose(set 1 is 2 tips,set 2 is 3 tips,set 3 is 4 tips,set 4 is 5 tips) 3. T2 / T12 handle (907 handle conversion) 4. T2 / T12 inner tube bracket kits 5. silicone 5 Core cable , cable length: 100~110cm 6. station 5 core aviation plug 7.flux 8.the solder 9.Other cable/acceories ( shows)

Controller setting mode:

(The default has been set, no special requirements, please do not set up a )

Pre and hold the encoder on does not move rarr start rarr enter the settings mode:

There are 12 menus available for setup,P00,P01,P02,P03,P04,P05,P06,P07,P08,P09,P10,P11.The digital display menu is 1.5 seconds,and then automatically displays the corresponding s of this menu,at the same time rotate left encoder is reduced,right is increase,Pre it and automatically save the currently set s.And then display the menu for 1.5 seconds, and then display the corresponding s of this menu, and so on. When all s are set to automatically enter the normal heating mode.

Because each set a to save once, so you can shut down at any time without having to set all the s (such as you just want to set P01, set P01 after you can shut down and then boot into normal mode)

Menu item:

P00: restore the default s (0 or 1, the default value of 0,0 for not recovering, 1 for the recovery)

P01: Operational amplifier gain (200 to 350 times, step 1, default 230)

P02: Operational amplifier offset voltage (0 ~ 250mV, step 2, the default value of 100, refers to the tto keep the room temperature operational amplifier inherent output voltage, according to my measurement this voltage varies greatly with temperature, different magnification Not the same, the higher the magnification, if you do not measure, please keep the default value)

P03: thermocouple ℃ / mV data (30 ~ 50, step 1, the default value of 41, refers to the thermocouple need to temperature how much voltage was increased by 1mV, according to the type of thermocouple self-calculation, if you do not understand, please keep Defaults)

P04: temperature adjustment step (0,1,2,5,10 degrees optional, 0 can lothe temperature)

P05: sleep time (how long donrsquot not move into sleep) (0 ~ 60 minutes, step 1, 0 is to forbidden the sleep function)

P06: Shutdown time (0 ~ 180 minutes, 0 ~ 30 step 1,30 ~ 180 step 10, 0 is forbidden shutdown function)

P07: temperature correction (+20 degrees, step 1) (due to NTC resistance in the chais, the station heat will lead to the detection of NTC temperature higher than room temperature, resulting in high temperature compensation of the thermocouple, temperature is not accurate,or other causes the temperature is not accurate.If you set the other s are correct value but the temperature is still high or low, you can use this correction.For example, to detect the displayed temperature is 20 degrees higher than the actual value of this Set to 20)

P08: wake mode (0,1, 0 in the shutdown mode can be rotated the encoder and also can shake the handle to wake up, 1 can only rotate the encoder wake up (Note: pre the encoder can not wake up, can only rotate) )

P09: temperature increase mode to increase the temperature to adjustable (20 degrees to 100 degrees adjustable, adjust the pace of 10 degrees)

P10: temperature to increase the duration to adjustable (adjustment range of 10 seconds to 250 seconds, adjust the step 5 seconds)

P11: setting mode Auto save and return to heating mode Function to active time adjustable (range 4 seconds to 60 seconds)

Installed Note: 1. Strictly reference shop tutorials, well insulated and grounded against static electricity. 2. Before power test, carefully chethe wiring is correct, whether Weld and short, full power test machine after confirmation. 3. connect 12-24V DC, if received more than 20V power supply,2017 new style product don't need to remove anything! 4. When you configure the power supply voltage and current requirements thelves refer to the following table: Power (third column) is determined by the voltage (first column), as long as the current reaches the minimum current (second column). Measuring Machine normal, lights and display status: 1. Unplugged T12 tip, turn the light flashed off, show SER, 1 seconds after the display 500. 2. T12 plug tip, boot light uniform flashing, indicating rapid heating from room temperature generally show the set temperature to rise, approaching the set temperature, strobe lights. Indicator is not flashing or intermittent fl, indicating that the ttemperature reaches the set temperature or alternating temperature compensation. When measuring machines on display digital bounce questions: Because with the new T12 tip, the tinside the heater did not burnt, it will be just a little jump start with warm, generally do not need special treatment, the natural use of 1-2 days basically not bounce up. If you need effective immediately, the general recommendations of the temperature to 350 -380 degree while heating to the point of tin head, burning off after 4-5 minutes, until the tto cool before you can reboot! (1 no action can be repeated 2-3 times ) More than 400 degrees, the temperature shows instability, it is the industry can not solve the whole, we commonly used temperature is 300 to 380 degrees, the basic use of le than 400 degrees, more than 400 degrees use, will affect the working life of the head Package Contents 100% 1x As the main picture shows all diy kit

English manual If you choose our new powr supply(the size suitable for our shell),the power supply connect like the following photo(cliinto the photo to choose the power supply if you like it) (Note:this product not inclue the shell and the power supply ,you can choose the ABS shell if you want in this link)

1) We accept , , TT. All major credit cards are accepted through secure payment proceor ESCROW.

2) Payment must be made within of order.

3) If you can't checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within .

1. You have 7 days to contact us and 30 days to return it from the date parts received. If item is in your poeion is more than 7 days, it is considered used and or replacement will not be accepted. And customer should be responsible for all the charges of returning and reshipping.

2. All return it must be in its conditions, including box and acceories. Men made defects are not guaranteed, such as broken, scratched and so on, shipping tracking number, specific reason for the return, and your po#.

1.Buyer's early confirmation will be highly appreciated after receiving the it.

2.Since your feedbais especially ant to our busine's development, we sincerely appreciate your positive feedbaif you are satisfied with our product and service. 1 minute to you ,extremely vital significance to us.

3.Please contact us before leaving any negative or neutral feedback. We will try our best to solve any probl.Thanks for your understanding!

Welcome to our store--- UG International Supply Store

Thank you for choose UG. We Will Be No.1 In China! We are an honest seller on Aliexpre.

As a manufacturer of electronic module, UG have been in busine more than 20 years, and therefor have wide experience in all the line we handle.

To Be No.1 Supplier Of Electronic Module In China !

All our it from our factory are with high quality.

If you have any probl, we are very glad that you can contact us.We will try our best to help you.Hoping to establish a long term cooperation with you.

Always Imitated, But Never Surpaed In China.

If You Other Supplier Price Lower Than Us, Quality Than Us, Please Let Us Know, We Are Going To Beat Them!

OEM Service Also Welcome!

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.