ELM327 V1.5 Car Code Reader BT WiFi EL27 18F25K80 Ch OBDII Tool For hone/Android PK ICAR2 OBDSCAN Scanner

Bluetooth/Wifi ELM327, with Real 18F25K80 Ch/ version V1.5/4mHz/understand commands such as ATPPS and other.

Version A and B are the same inside, It is just different from the cover.

Please choose the right device according to your phone system, android or IOS.

1. Bluetooth ELM327 supports android system only.

2. Wifi ELM327 supports both Android and IOS system.

If you have an hone, please buy Wifi ELM327.

Wifi ELM327 interface is able to detect and interpret obd2 / eobd protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, for iOS). There are plenty of packages available, which are fully compatible with this tool. Some of them have pretty useful features, such as engine running s monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own on a specified hardware platform if you wish, because the AT commands are fully doented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBDII cable for easy installation. It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant. Connecting to your hone / od touch is made by WIFI connection in adHoc mode.

Features:

* Version V1.5 (Supports more protocols SAE J1850 than V2.1). * With ch: 18F25K80, supports all elm327 fucntions, in program ELM327 identifier, it shows full functions. * It understand commands such as ATPPS and other. * The frequency of the crystal oscillator is 4mHz.

Main Functions:

With proper installed in the host device, you may have following s read out from your vehicle: * Vehicle Speed * RPM * Fuel Consumption * Engine Coolant Temp * Fuel Preure * Calculated Engine Load * Throttle Position * Intake Manifold Preure * Air Intake Temp * Timing Advance * Ma Air Flow * Fuel Level * Barometric Preure * EVAP System Preure * Fuel Trim ...

Note:

Your vehicle may not support all above s. How many s you can get is depended on the vehicle manufacturer's implementation.

Supported Protocols:

1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud)

3. ISO9141-2 (5 baud init,10.4Kbaud) 4. ISO14230-4 KWP (5 baud init,10.4 Kbaud) 5. ISO14230-4 KWP (fast init,10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID,500 Kbaud) 7. ISO15765-4 CAN (29bit ID,500 Kbaud) 8. ISO15765-4 CAN (11bit ID,250 Kbaud) 9. ISO15765-4 CAN (29bit ID,250 Kbaud) A. SAE J1939 CAN (29bit ID,250*Kbaud) B. USER1 CAN (11*bit ID,125*Kbaud) C. USER2 CAN (11*bit ID,50*kbaud) *default settings (user adjustable)

This elm327 usually can work on most new car with OBD 16pin Aadapter and 12V engine:

For USA Car brand, after 1996; For Europe Car brand (petrol), after 2001; For Europe Car brand (), after 2004; For Japan Car brand, after 2006; For Korea Car brand, after 2010; For Chinese Car brand, after 2009; For Ruian Car brand, after 2012; ...

Supported cars:

If your vehicle does not fall into any of the above categories, look under the hood and try to locate a label that explicitly states that the vehicle was designed to comply with OBD-2 legislation.

Hardware requirements:

For Android/for IOS devices (for hone, ad e.g.)/for PC - Bluetooth elm327 supports android system only, does not support IOS system, so if you have a hone, please buy wifi bluetooth ELM327. - Wifi elm327 supports both android and IOS system.

Requirements:

All ELM327 based .

IOS system in Apple store:

Car Scanner / OBD Auto Doctor / OBD Car Doctor / EOBD Faciles / Rev / FUZZYCar/ DashComand / SpeedPORT / Nova Scan ...

Attention: For iOS base are not included, you must buy from Apple App Store!

Android system ：

Torque pro / Mini OBD2 / OBD Car Doctor / DashComand ...

Windows system:

Scanmaster- ELM / PCMSCAN...

Technical Specifications:

SSID: WiFiOBD : 192.168.0.10 Subnet: 255.255.255.0 Port: 35000 Range: 50 ft (Line of sight) Antenna: Internal Power Consumption: 0.75 Watts Wifi Standard: 802.11a/b/g Operating Temperature: -15 to 100 Deg Celsiu

Packing list:

1 x ELM327 obd interface

Connect with your phone and car:

WIFI Version:

Bluetooth version:

Product ture

Wifi Version A:

Wifi Version B:

Bluetooth Version A:

Bluetooth Version B:

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.