Embroidery Machine Clothes Sewing Machine Handy DIY Press Fabrics for Sewing Set Hand-held Portable Manual Mini Apparel Supplies

Describe:100% and high qualityMaterial: ABSColor as shownProduct size: 20.5cm*6.7cm*3.2cmFeatures:Hand-held sewing machine, single , battery or power adapter.Small and light, portable and easy to carry.It is very suitable for on-site maintenance and modification. It requires 4 x AA batteries (not included) or 6V 600mA power adapter (not included). It is very suitable for beginners and novices. It can be used with pre-installed threads.Can be used at home, in offices, cars, etc.Package included:1 x Sewing machine (Batteries not included)1 x 2 x Bobbins with thread1 x threader1 x Extension Spindle Pole1 x User manual1 x1 Piece of clothNote:1.The thickne of the fabric should be 1.8MM around, can't work with the fabric too thick or too thin2.This is a Single Thread Sewing Machine, so you have to Tie A Knot by yours3.If the product can't work smoothly , please contact us for repment4.Can't mix the battery with different brand or mix the battery with old and new5.Wait for a moment when the battery get too hot

Operating Steps:1. Install 4 AA batteries (Can't mix the battery with different brand or mix the old battery with new battery)2. Installation line, p the cloth3. Hold the fabric with the left hand, gently pre the right thumb gently, the mechine will automatically send the object to the left. The right hand does not move, let the machine feed its, and the left hand controls the direction of the cloth. Stitch the line until the end of sewing, it can automatically feed and adjust the tightne between the stitches.4. Knot: The Single Stitch, so you have to Tie A Knot by yours.5. Change the line group: Pull out directly, be careful not to drop the spring. For example, if you change the large line group, you can connect the spare extension rod to the spool shaft and insert the large thread group. Then re-thread the thread and adjust the tension of the thread. Sewing.6. Change the : Loosen the fixing screw, install a new .

The machine does not sew, sew intermittent, what should i do?1: Unscrew the screw, loosen the screw2: Adjust the to a proper length,The height of the is neither too high nor too low. (the head can be seen from the hole ).3: Tighten the screw till the is immovable. When tightening the screw, there is a groove on the body. This groove must face straight ahead.