ESP32 ESP-WROOM-32 CP2102 Development Board WiFi+Bluetooth WiFi+Bluetooth Ul-Low Power Consumption Dual Core Wireless Module

U.S. buyer attention:The areas where the US warehouse does not deliver goods are: Hawaii, Alaska, Puerto Rico, Guam and other US oas territories. And the addre. But you can choose ship from China.Spanish buyers attention:If your addre includes following postal code please do not choose the Spanish warehouse.The zip code starts with 35/38.Oas warehouse cannot be delivered. But you can choose ship from China

Description:1. The main body of the module is ESP-WROOM-32 module, and the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, which can be directly debued by a USB connected computer, and the data nsmiion is fast and stable.2. It has power indicator (red light) and working status indicator (blue light) on it, so you can know the status of the module at any time.3. There are two touch ons, one is reset, the other is enable module to enter the halberd program mode. In addition, the pins on both sides of the development board are convenient for developers to connect and use.4. The module has powerful Bluetooth-compatible and WiFi functions. As a Bluetooth-compatible and WiFi development board, it can obtain rich resources from Lexin and anxinco official websites.5. In addition, the module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development. Of course, it can also be widely used in Internet of things occasions, such as home automation, wirele industrial control, wirele positioning system signal, etc.Feature:1. The module is the ESP- WROOM-32 development board, and the ESP- WROO2 characteristic is also the characteristic of the module.2. 802.11b/g/WiFi + BT module.3. Low power dual core 32-bit CPU, which can be used as application proceor;4. The main frequency is up to 240MHz, and the operation capacity is up to 600DMIPS.5. Support UART / / I2C / PWM / DAC / ADC and other interfaces;6. Support openOCD debuing interface;7. It supports multe sleep modes, and the current reaches 6.5ua in deep sleep;8. Embedded LwIP and FreeRTOS;9. Support STA/AP/STA+AP mode;10. Support Smart Config / Airki one key distribution network;11. General at command, easy to use;12. Support local serial port upgrade and remote upgrade (FOTA).Specification:F: default 32MbitBluetooth-compatible: Bluetooth-compatible 4.2 BR/EDR and BLE standardsSupporting interfaces: UART, , SDIO, I2C, PWM, , IR, ADC, DACOn chip : Hall sensor, temperature sensor, capacitive touch sensorIO port: 22pcsSerial port rate: 115200 BPS by defaultSpectrum range: 2412 ~ 2484MHz form: on board, gain 2dBinsmitting power: 802.11b: 17 ± 2dbm (11Mbps) 802.11g: 14 + 2dbm (54Mbps) 802.11n: 13 ± 2dbm (MCS7)Receiving sensitivity: CCK, 1Mbps: - 90dbm CCK, 11Mbps: - 85dBm 6Mbps (1 / 2bpsk): - 88dbm 54Mbps (3 / 464-qam): - 70dBm mcs7 (65mbps, 72.2mbps): - 67dbmPower consumption: 300mA 3.3VSecurity: WPA / WPA2 / WPA2 Enterprise / WPSPower supply range: USB power supply: 5V pin power supply: 5.0V~12VWorking temperature: - 20 ~ 85 ℃Storage environment: - 40 ~ 90℃, < 90% RHProduct size: 52 * 29 * 15mm/2.04*1.14*0.59''Note:Please allow 1-3mm differs due to manual measurement.Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.1 X ESP32 Development Board