EU Digital LCD Energy watt Meter Wattmeter Wattage Electricity Kwh Power monitor Electric Meter Measuring Outlet Power yzer

Please note: EU plugs are not applicable to the following European countries: France, Belgium, Poland, Czech Republic and Slovakia Please buy a French plug

Why are we more expensive than others?

Because our products use high-precision chs, high-precision chs, surface gold-plated through-hole lead-free proce environmentally friendly certified components, reasonable wiring, and reduce safety hazards.

Since batteries are not allowed to be carried by air, there is no battery in the product and the buyer needs to bring his own battery (AG13/LR44)

EU/Italy/French/Swi plug: 1. Power consumption of power meter monitor: 0.5W -Working voltage: 230VAC 2. Frequency display: 50HZ -Working current: 16A max -Wide voltage range: 200V-250V -Set the wattage display (watts) to 0W~9999W; but the actual wattage display (watts) is 0~3680W (the Swi power meter label shows 2500W, the actual is 3680W) 3. Timing display range: 0 seconds to 9999 days -Voltage display range: 0V~9999V -Current display (Amps): 0,000A~16,000A 4. Frequency display: 0Hz~9999Hz 5. Price display range: 0.00COST /KWH¡ «99.99COST / KWH 6. Total kWh and cost display: 0.000KWh-9999KWh, 0.00 cost ---- 9999 cost 7,2-pin German plug -Funktionsanzeige US plug: 1-Working voltage: 120VAC 2. Frequency display: 60HZ -Working current: 15A max -Wide voltage range: 110V-130V -Set the wattage display (watts) to 0W~1800W; 3. Timing display range: 0 seconds to 9999 days -Voltage display range: 0V~9999V -Current display (Amp): 0.000A~15.000A 4. Frequency display: 0Hz~9999Hz 5. Price display range: 0.00COST /KWH¡ «99.99COST / KWH 6. Total kWh and cost display: 0.000KWh-9999KWh, 0.00 cost ---- 9999 cost 7, 3-pin plug UK plug: 1-Working voltage: 230VAC 2. Frequency display: 60HZ -Working current: 15A max -Wide voltage range: 200V-250V -Set the wattage display (watts) to 0W~2900W; 3. Timing display range: 0 seconds to 9999 days -Voltage display range: 0V~9999V -Current display (Amp): 0.000A~13.000A 4. Frequency display: 0Hz~9999Hz 5. Price display range: 0.00COST /KWH¡ «99.99COST / KWH 6. Total kWh and cost display: 0.000KWh-9999KWh, 0.00 cost ---- 9999 cost AU plug: 1-Working voltage: 230VAC 2. Frequency display: 60HZ -Working current: 10A max -Wide voltage range: 200V-250V -Set the wattage display (watts) to 0W~2500W; 3. Timing display range: 0 seconds to 9999 days -Voltage display range: 0V~9999V -Current display (Amp): 0.000A~13.000A 4. Frequency display: 0Hz~9999Hz 5. Price display range: 0.00COST /KWH¡ «99.99COST / KWH 6. Total kWh and cost display: 0.000KWh-9999KWh, 0.00 cost ---- 9999 cost

XINQI Power meter Operating Instruction

Function descrtion: XINQI power meter is a smarter electronic device than PM. It has a unified electricity price. It can use the daily consumption history histogram of the past 7 days, weeks and months to measure the energy and cost of household appliances , Can also help users reduce energy consumption, electricity bills and carbon emiions.

•Operation steps:/p>

First install 2Xl.5V batteries (LR444/AG13) to realize the storage function. Reset, if the screen is not displayed or the ons do not work, please pre "Reset" to connect the product to the power source. This means PM can start working

I. Display mode: turn on the power supply, the PM LCD screen will display all contents (as shown in the ture above, it will take about 3 seconds).

1 .1 Turn on the power supply or reset, the LCD displays the current first rank Win. 1 .2 Display and setting: Pre “ENERGYY +” on, change various display parameters.

2.Setting hours and cost:/p>

2.1 Power on or reboot, the LCD will show the clo in second place. 2.2 Cli "COST-"

2.3 Aculation time: When the power exceeds 2W, the product will start to work. The first digit shows (alarm sign) and 0:00. Up to 60 minutes, the first number is counted as minutes (two numbers are displayed after 10 minutes), and the second number is counted as seconds. After 60 minutes, the first day is considered one hour. (After the JO clo shows two numbers), the next two numbers are regarded as mi

2.4 Aculated electric power range, 0.000 kWH ~ 9999 kWH

2.5 Range of aculated electric charge: 0.00COST~9999COST

2.6 Cost of Tariff 1: 0.00COST/KWH ~ 9999COST/KWH(YQXINQIDZ )

2.7 Time of Tariff:/p>

2.8 Cost of tariff 2： 0.00COST/KWH ~ 9999COST/KWH

2.9 Time of Tariff 2:/p>

2.10 Volume kg of CO2 0.00 ~ 9999 kg GO2/kWh

2.11 Total volume kg of CO20.00 ~ 9999 kg CO2

3. Display and setting:/p>

3. Display and settings: 3.1. Clo setting: Pre the "COST-" on to return to the time screen, then pre and hold the "SE TTOK" on for 3 seconds, the (alarm logo) will f, pre "HlSTORY" to select the location, and then pre "ENERGY / +" or "COST / -»" Set the number, and then cli the "OK" on to complete. If there is no action, it will log out the current settings and save the old settings after 10 seconds.

3.2 12/24H exchange, in clo screen, pre"HISTORY"andENERGY/+"together and keeping more than 3 seconds:/p>

3.3.TARIFF setting: pre"COST/-" ba to tariff screen,keep preing"SET/OK"in 3 seconds. 3.3.1 now"TARIFF 1"fing,.pre"ENERGY/+"or"COST/-"select "TARIFF 1"or"DUAL TARIFF" then pre"HISTORY"to confir.3.2: (if current is"DUAL TARIFF") the wav to TARIFF1.Pre"HISTORY"to the correct position, then pre"ENERGY/+"or"COST/-"tosetting.range:0.00COST/KWH-9999COST/KWH.and pre"SET/OK"toconfirm.

3.3.3 Time of Tariff 1 setting: in"TIME START"screen, pre"HISTORY"select the correct position,pre"ENERGY/+"or"COST/"to setting the time,range of first two numbers:0-23; range of last two numbers:0-59,When youfinish,pls pre"OK"on.

3.3.4Tariff 2 setting:pre "HISTORY"on to choose the twinkle number(the second rank of LCD)then pre "ENERGY/+"or"COST/-"botton to set rate(range:0.000 ~9999COST/K WH). When finish,pls pre"OK"on.

3.3.5Time of Tariff 2 setting: in"TIME START" screen, pre"HISTORY"select the correct position,pre"ENERGY/+"or"COST/-"to setting the time,range of first twonumbers:0-23; range of last two numbers:0-59, When you finish,pls pre"OK"on.

TARIFF I setting:If choose simple tariff"TARIFF 1",vou just need to set the rate of "TARIFF 1", then pre "SET/OK"on for saving all parameter,then it will enter into initial LCD displayed mode.

Remark:/p>

1,When electric charge and price are displayed on LCD, the symbol are always existed,and the system regard as initial . 2,If the system is in "DUAL TARIFF"mode.finished tariff 2 means the start of tariff 1;finished tariff 1 means the start of tariff 2. 3, When set price parameter , the symbol must be displayed.

4.OVERLOAD Setting:/p>

Pre"ENERGY/+" on to select the "OVERLOAD" screen,Pre"SET/OK" on more than three seconds, it will enter into "OVERLOAD" wattetting,now"W"is fing.pre"ENERGY/+"or"COST/-"to setting"W"or"A" Remark: A. If you pre the on but don't do any response, it will quit the OVERLOAD automatically. B. When current load power exceed the overload parameter which seted before, the "OVERLOAD" will keep twinkling,it means dangerous and have safety loophole,system regard as initial parameter 3680W

5 C02 setting:/p>

Pre"COST/"toco2 screen, then keep preing "SET/OK"in 3 seconds to setting:/p>

pre"HISTORY"to select the position, then pre"ENERGY/+"or"COST/-"to setting, pre"SET/OK"to save.

6, History bar graph of past 7 days/weeks/months daily consumption.

Pre HISTORY"can change the screen

6.1 The initial setuplbar=1KWH, if the real power consumption is too big to display by 1KWH, it will change to 2/3 KWH automatically.

6.2 The real power consumption of days/weeks/months.

6.2.1: The real day power consumption in last 7 days: pre "HISTORY"in 3 seconds when screen in "daily", pre"ENERGY/+"or"COST/"to select the day you want, The real day power consumption will display in the second rank. 6.2.2:The real week power consumption in last 7 weeks: pre "HISTORY"in 3 seconds when screen in "weekly", pre"ENERGY/+"or"COST/-"to select the week you want, The real week power consumption will display in the second rank. 6.2.3:The real month power consumption in last 7 months: pre "HISTORY"in 3 seconds when screen in "monthly", preENERGY/+"or COST/-"to select the month you want, The real month power consumption will display in the second rank

7, Fast clear function:/p>

7.1.preENERGY/+"and"COST/-"in 3 seconds until the screen is fing, 7.2.then pre the"SET/OK"in 3 seconds. All the number will be deleted.

Exception ysis:/p>

1. Please che whether the connected power supply is in use.2. Please che the batteries in the PM whether can be normally used3. Please che whether pre" RESET"on for recovering.

About shping
Shping and Pa All it will be double cheed and well paed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for e areas,it may take a little longer). 

Special Announcement:/strong>
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbaYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.