EU US 110V 220V DIY Using Heat Gun Electric Power Tool Hot Air 300W Temperature Gun With Supporting Seat Shrink Plastic DIY Tool

s

Main Product: Hot Air Gun

Plug Type: EU US

Heat Gun Power: 300W

Widely Application: DIY Craft Emboing, Shrink Wrapping PVC, Drying , Clay, Rubber Stamp, etc

Achievable Temperature: 200℃

About This Item

Safety Hot Air Gun:

Hot air shrink gun was made of high-quality stainle steel and ABS plastic.

Cooling Holes:

The temp of the nozzle could reach 200° in seconds. The heat vents of the heat gun tail can decrease the internal high temp and extend the life!

Easy to Use:

The handing part adopts salient point nonskid designs that cause safe handholding with small energizing!

How to Use the Heat Tool

Plug in the heat tool. Hold the product as shown on the pict. (Do not touch the hot nozzle.)

Keeping 3-5cm distance from work and about a 45-degree angle to heat until it is completed. (Do not blow the hot air gun directly at 90° to the object.)

Warm Tips:

The temp of the nozzle could reach 200° in seconds, please don't use it for more than 10 minutes at one time.

If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it.

It can not be used in industrial aspects such as disaembly and welding of small iron sheet components and patch integrated circuits.