For FPV Aerial Gimbal Module 2-Axis Gimbal 3-Axis 2D

Scope Of Application: for Series Compatible Cameras
Colour:Silver
Material:aluminum alloy
Power Connector: Jst And (How To Install)
1. Remove The Shock Absorbing Ball And Open The Top Mounting Plate
2. Lock The Mounting Plate On The Lower Part Of The Aircraft With Screws
3. Install The Shock Absorbing Ball
4. Install The Camera, Fasten The Camera With A Strap
Instructions For Use
After Installing The Camera (Be Sure To Install The Camera, Otherwise It Will Keep Shaking), Stabilize The Gimbal For About 20 Seconds After Powering On (Don'T Shake The Gimbal, Keep The Gimbal Hanging And Off The Ground), And You Can Use It Normally After Hearing A Sound
Pitch Can Be Controlled By Receiver Or Other Individual Pwm Channels
You Can Set Follow Mode Or Lock Mode
Angle Mode Or Speed Mode Can Be Set

Package Contents:
1 x Gimbal Module
2 Sets x Cables
1 Set x Screw Installation
1 x Wire Tie
1 x Chinese And English Instruction Manual
Note:Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.