Free Shping!! FDC Brand BT Interphone Bluetooth Motorcycle Motorbike Helmet

Updated Version !!  2PCS  T-COMVB BT Bluetooth Motorcycle Helmet Interphone Headset with FM Radio

.

Speaker Has Been Upgraded To FreedConn V3 HiFi Speaker

The USB charging port has been upgrated from 8pin to 5pin, it is more convenient to charge

Stable Quality Claical And Tiny Size

Super Long Standby Time

Waterproof,Sunproof,Dustproof

Hard & Soft Cable Microphone Into One Earphone

Suitable For Different Helmets

Main Features:

(1) Wirele headset for bluetooth enable cell phone at a range of up to 10 meters.Bike-to-bike for rider& paenger or two separate bikes up to 800 Meters in open SpaceUp to 10 hours talk time when connected to cell phone.Up to 6 hours talk time when using the feature.Up to 300 hours standby(2) Call out, call answer, call reject, call hang up.(3) Receive a cell phone call automatically(4) Dial the last number(5) Support audio transfer.(6) Enjoy the cell phone music through A2DP or connect GPS(7) Control cell phone music through AVRCP: forward, backward, play, pause(8) Automatic switching among bluetooth cell phone, , stereo music.(9) With DSP echo cancellation and noise suppreion technology, crystal clear voice quality is guaranteed in a high speed.(10) on panel is water-proof and sun-proof, while the design is durable.The Inter Phone is a Bluetooth Headset designed for the motorcycle rider and paenger who wish to have clear and reliable wirele communications while riding. This headset is compatible with Bluetooth cellular phones and can be suited to any sort of helmet for motorcyclists.This device allows bikers to receive GPS voice instructions, communicate with the paenger on the back seat, to conduct calls on their mobile phone and listen to the music or their MP3 player.Last but not least, the device offers biker-tobiker communication.This headset works with any Bluetooth equped mobile phone. Designed and Engineered for Heavy-Duty Performance.Mounting the Inter Phone:1. Take your Inter Phone Headset and slide it down into the slots in the Headset Cl Mount. Make sure that it's perfectly fitted and locked into place by trying to extract it, pulling upwards.2. Now you need to attach the speaker and microphone arm to the inside of the helmet. Take the Velcro pad which the speaker will attach to, and test for the best position to fix it. The Velcro Pad should be fixed at the height of your ear in the helmets ear pocket. You will need to put the helmet on a few times to find the optimum position to apply the pad. When the correct positioning is found, remove the protective str and apply the Velcro Pad.3. Next, take the Ear Speaker and attach it to the Velcro Pad. Run the Microphone Arm down along down to where your mouth will be. As the Microphone Arm is ible, you can adjust it so it sits in the optimum position in front of your mouth. Some helmets have removable padding; if yours does, it is recommended to run the speaker and microphone under the padding.4. Taking care to match the pins up, connect the Headset Plug to the Headset Socket. The plug can only be inserted in one position.5. Secure the cord of the Headset Plug inside the helmet. Tuck any extra wire into the helmet. Ensure that only few centimeters of the cord comes out. You have succefully mounted the Inter Phone.Turning the unit on into standby mode:Pre and hold the small black power on at the end of the unit. After 3 sec you will hear a “Di” and the blue LED will begin to f. Let go of the on and the unit is now in standby mode.Please Note:Motorcycle Helmet is not included.Turning off the unit:Pre the small black power on for 5 seconds or until you hear 2 “Di” tones and the lights extinguish.To pair to your Bluetooth enabled mobile phone:When the unit is off, pre and hold the small black power on at the end of the unit. Hold the on until you see a RED AND BLUE light fing. It normally takes around 5-8 seconds from off. Do not let go when you see the blue light. You will also hear a “DuDu” tone when the unit enters pairing mode. On your phone, search and attempt to pair to the device, when the device is fing red and blue. If requested the pairing code will be 0000 and you should set the phone to auto pair to the device.To Pair 2 devices in mode:When both devices are turned off, pre and hold the small black power on on both devices until both units f red/blue repeatedly. You need to hold the on for more than 6 seconds and dont let go when you see the blue light.Short pre the black power on on ONE of the two devices and this device will search and auto-pair to the other in mode. A live call will be initiated.If this fails retry it ensuring both red/blue light sequences are initiated simultaneously and are close together. Also ensure any other Bluetooth devices are turned off.When paired, you do not need to go into pairing mode again. In future you only need to go into standby mode (blue light fing) on both units and pre the on on one of the devices.To Pair 3 devices in mode:Follow the above procedure for each combination of the three units. (A-B, B-C, A-C).Ensure the third unit is switched off when pairing the other two devices.Only 1 connection can be live at a time. When succefully paired the connections can be switched by ending any live call and returning to standby.From Standby pre the power/ on 1 time for one of the pairings to be called, or 2 times for the other pairing to be called.The pairing for 1 or 2 prees will depend on the sequence in which you paired the 3 helmets, but once paired the relevant pairings will maintain the number.i.e. A will pre the power/ on 1 time to call B and 2 times to call C. B will pre the on 1 time to call C and 2 times to call A. C will pre the on 1 time to call A and 2 times to call C.To Reset the pairing memory:If you have probl pairing, then it is best to reset the pairing memoryTurn on the relevant unit into standby mode. Pre the power/ on for 3-5 seconds till a “dudu” can be heard. This should be before the unit switches off.Let go of the on when the tone is heard.Turn off the unit and restart, the memory will be erased.To Use FM Function:1. Headset idle status, pre MFB twice to turn FM on.2. When FM is on, turn the MFB clockwise or counterclockwise and it will seekout the next or previous FM station and begin playing.3. When FM is on, pre MFB twice to turn FM off.

Package contents:

1/2 x Bluetooth Device1/2 x Ear Speaker& Microphone (Hard & Soft Wire Mic)1/2 x Screw driver4/8 x Felted Adhesive Earphone Pads1/2 x Headset Cl&Fastening Screws1/2 x USB Charge Cable1/2 x User Manual

Note:Power Charger is not included.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.