FT232H High Speed Multifunction USB to JTAG UART FIFO I2C

CJMCU FT232H    USB to JTAG UART/FIFO IIC I2C

Tyal ApplicationsSingle USB to UART (RS232, RS422 or RS485)USB to FIFOUSB to FT1248USB to JTAGUSB to USB to I2CUSB to Bit-BangUSB to Fast Serial InterfaceUSB to CPU target interface (as memory)CJMCU-FT232H is a single USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of g configured in a variety of industry standard serial or parallel interfaces. The FT232H has the following advanced features:Single USB to serial / parallel ports with a variety of configurations.Entire USB protocol handled on the . No USB specific prograng required.USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, (MASTER) or bit-bang) design.UART nsfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shir).USB to asynchronous 245 FIFO mode for nsfer data rate up to 8 Mbyte/Sec.USB to synchronous 245 parallel FIFO mode for nsfers upto 40 Mbytes/SecSupports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide).CPU-style FIFO interface mode simplifies CPU interface design.Fast serial interface option.FTDI's royalty-free Com Port(VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.Adjustable receive er timeout.