HC-05 HC 05 Hc-06 HC 06 RF Wireless Bluetooth Module RS232 / TTL To UART Converter And Adapter For Arduino

[HC-05] It's HC-05 Bluetooth module and master two in one module. This module can be set to a or receiver, could pairing with receiver , receiver and receiver or and can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver. Use the CSR mainstream Bluetooth ch, Bluetooth V2.0 protocol standards. Module working voltage 3.3 V. Potter default rate of 9600, the user can be set up. The core module size : 28 mm x 15 mm x 2.35 mm. Working current: matching for 30 MA, matching the communication for 8 MA. Dormancy current: no dormancy. Used for GPS system, water and electricity gas meter reading system. With computer and Bluetooth adapter, PDA, seamle connection equment Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation ch. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-search" on(ON/OFF/WAKE foot for it , external MCU out/input "High level" can control module to re-search) Compatible with Bluetooth master module " module" or master-(whole) module. Input voltage: 3.3 -6V Size: 1.55cm * 3.98cm Note: Input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply We ase to install "Bluetooth master module" The "State" is output foot for LED status, when Bluetooth "Unconnected", output "Pulse", when Bluetooth "connected", output "High level", we can determine the states from "MCU" If only the board, No any "Bluetooth Function" [HC-06] This's HC-06 Bluetooth module. Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. Feature: Works with any USB Bluetooth adapters. Default Baud Rate: 9600,8,1,n. Built in antenna. Coverage up to 30ft. Bluetooth version: V2.0+EDR Operating voltage: 3.3V Default Baud Rate: 9600,8,1,n. Signal coverage: 30ft Cable length: 21.5cm Item size: 4.3 * 1.6 * 0.7cm Item weight: 3g Package size: 9 * 3 * 1cm Package weight: 8g Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation ch. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" on(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module". module"or master-(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: Input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply We ase to install "Bluetooth master module" The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU" If only the board , No any "Bluetooth Function"

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.