High quality CPU Cooler SNK-P0064AP4 heatpe dual-tower Cooling Fan H11 Support for AMD EPYC 7000 Series CPU Heat Sink

webcam cover for laptops usb camera CPU Cooler Cooling Fan Computer Supplies SNK‑P0064AP4 EPYC 7000 Soet SP3

Feature:

1. This CPU cooler is specially designed for H11 generation 4U servers and workstations equped with EPYC 7000 series proceors. 2. The has been thoroughly tested and verified by for to ensure quality and cooling performance. 3. This CPU cooler is durable, with large air volume, quiet and efficient heat diation. 4. The heat sink can effectively reduce the temperature generated by the CPU during operation. 5. The fan revoing speed is 3800rpm, low noise, stable and reliable performance.

Specification:

Item Type: CPU Cooler

Model: SNK-P0064AP4 Applicable : For H11 single/dual Soet Type: Soet SP3 Applicable CPU: EPYC 7000 Series CPU Heat Sink Sound (dBA): 38dBA Speed (rpm): 3800rpm Size: Approx. 119 x 92.5 x 126mm / 4.7 x 3.6 x 5in Application : 4U server/workstation platform Fan Connector: 4Pin Thermal Design Power (TDP): 180W Rated Voltage: 12V

How To Use: 1. Before installing the , please che that the must be correctly aligned with the flowing direction of the system cooling air 2. According to the required air flowing direction of the , adjust the position of the mounting screw so that it can be aligned with the relevant nut braet so that the can be installed on the stiffening frame. 3. Remove the thermal interface material (TIM) or thermal grease protective cover. The required amount of TIM has been pre-applied on the bottom of the heat sink. Che the pre-coated TIM for damage. 4. Place the heat sink directly on the of the CPU so that the four heat sink mounting screws are aligned with the four heat sink mounting studs or nut braets on the slot reinforcement frame and fixed on them. The must be correctly aligned with the flowingdirection of the system cooling air. Please note that when tightening the four mounting screws, do not install the cooling fan on the body. 5. Use a screwdriver with a Star T20 drill bit and adjust the torsion setting of the screwdriver to 16.1 kgf-cm (14.0 lbf-in). Before opening the screwdriver, make sure that the screwdriver bit is fully inserted into the hole of the heat sink mounting screw head. During the installation proce, keep the heat sink mounting screws vertical. 6. Tighten the two diagonal mounting screws, and rotate the screws 1 to 2 turns until they fit snugly. Do not tighten completely! Then, do the same with the remaining two diagonal heat sink mounting screws. 7. Make sure that the bottom of the is correctly placed on the CPU and prevent the from titrating. Please fully tighten all four heat sink mounting screws to complete the installation. 8. Install the cooling fan and braet aembly to the body, and then tighten the single loing screw on the of the fan braet 9. Connect the SNK-P0064AP4 cooling fan connector to the fan header marked CPU on the .

Paage List:

1 xCPU Cooler

1 xCooling Fan

1 xUser Manual

1 x Screw

About payment:

We support the following payment methods. All payments made on are proceed by .

1) We accept , , TT.All major credit cards are accepted through secure payment proceor ESCROW.

2) Payment must be made within 3 days of order.

3) If you can't cheout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.

About shping:

1. WORLDWIDE SHPING.(Except some countries and APO/FPO) 2. Orders proceedtimely after thepayment verification. 3. We only sh to confirmed order addrees. Your order addre MUST MATCH your Shping addre. 4. The images shown are not the actual item and are for your reference only. 5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. 6. If you have not received your shment within the period, please contact us. We will tra the shment and get ba to you as soon as poible with a reply. Our goal is customer satisfaction! 7. Due to sto status and time differences, we will choose to sh your item from our first available warehouse for fast delivery.

8. We seller are not in charge of duty, buyer is responsible for that. Any dispute caused by this is unreasonable.

9. BR buyer please provide the cpf or cnpj, it will be better for you to get it more quily. thanks

Return and :

1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your poeion more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A OR REPLACEMENT. There are NO EXCEPTIONS! 2. All returned it MUST BE in the pa and you MUST PROVIDE us with the shping traing number, specific reason for the return, and your po#. 3. We will YOUR FULL WINNING BID AMOUNT, upon recet of the item in its condition and pa with all components and acceories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpre. OR, you may choose to have a replacement.

About feedba:

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedba is very ant We request that you contact us immediately BEFORE you give us neutral or negative feedba, so that we can satisfactorily addre your concerns. It is impoible to addre iues if we do not know about them!

About shping
Shping and Pa All it will be double cheed and well paed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbaYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.