HW-300S Coating Thickness Gauge Electronic Components Digital Backlight Car Paint 0-2000Um Coating Meter Measure Car Paint Teste

HW-300S Coating Thickne Gauge Electronic Components Digital Backlight Car Paint 0-2000Um Coating Meter Measure Car Paint

Feature:

This product is mainly used to measure the thickne of non-conductive coatings on metal surfaces, as well as ferroic metals (such as iron, nickel, cobalt, etc.), such as the thickne of paint on the surface of automobiles, the thickne of coatings on metal parts, and so on. This product also has a built-in dual-princle probe of ic induction and eddy current, which can automatically identify the metal substrate to be tested. It only needs to be placed on the metal substrate to be tested, and the thickne of the coating can be automatically calculated. Specification: Product name: HW-300S coating thickne gauge Material: ABS + electronic components Product size: 120x45x23mm/4.72x1.77x0.91in Resolution: 0.01mm/1mil Measuring range: 0-2000UM Measurement accuracy: ±(3%+1UM) Minimum measuring area: 20mm/0.79in in diameter Resolution: 0um-99.9um (0.1um) 100um-999um (1um)>1000um (0.01mm) Power supply: 2×1.5V AAA batteries (not included) Operating temperature: -10 degrees Celsius and 50 degrees Celsius Working environment temperature: 0-50°C, 20-90% relative humidity (non-condensing) Zero calibration: Support Statistics: Average, minimum, maximum, quantity Certification: CE Color: Black, Orange Screen diaplay: Horizontal/Vertical Measurement steps: Step 1: Prepare the parts to be tested. Step 2: Stay away from metal objects at least 2 cm, pre the switch to open. Note: It is recommended to perform a zero adjustment test on the instrument with reference to "Zero Calibration" before calibration. Step 3: Place the probe vertically and quickly on the surface to be measured until you hear a drping sound, display the measured value on the screen, and then lift the probe at least 2 cm away from the screen to measure the part to be measured, you can perform the next measurement. Note: If the automatic shutdown function is turned on and there is no operation within 3 minutes, the instrument will automatically turn off. There are two calibration methods for this hine: 1. Basic calibration: Basic calibration should be performed when it is used for the first time, or when it has not been used for a long time, or when the tested substrate is replaced. There are 7 calibration methods for basic calibration points, and the calibration unit is millimeters. A. Prepare 6 standard films with a thickne of 0.04 - 0.06, 0.09 - 0.11, 0.22 - 0.28, 0.45 - 0.55, 1.90 - 1.05, 1.90 - 2.00. B. First pre and hold the up on, and then pre the on on, the LCD displays the kettle on the full screen, and then hears BI, the LCD displays 00mm, and the LCD displays the CAL character at the bottom right corner of the LCD. Release the up on to indicate to enter the calibration screen. C. Gently pre the probe on the uncoated aluminum base, the LCD displays 0.00 at this time, and then BI-BI calibration twice. D. Remove the probe and display a 0.05mm number on the LCD. The second digital calibration is to gently pre the probe on the aluminum base where the calibration sheet is placed. After adjusting the value displayed on the LCD and the thickne of the calibration sheet, pre the up and down keys to remove the probe and Bibi sound. The second calibration point has been calibrated. Zero calibration: In order to improve the test accuracy, it is suggested that the instrument should be calibrated to zero. a. Preparation of uncoated substrate to be tested b. Hold down the right hand until you hear the drop, and the "zero calibration (ZERO)" on the screen will begin to flicker. c. The probe is placed vertically and quickly on the surface of the uncoated substrate to be tested. After hearing the drping sound, the screen will display "0", and the probe can be lifted at least 2 cm away from the substrate, that is, to return to zero once. Package Included: 1 X Thickne Gauge(not included batteries) 1 X Manual 6 X Calibration Sheet

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.