Iron LCD Digital Display 80W Electric Adjustable Temperature Solder Iron Station Hand Welding Repair Tools Kit 60W Solder Kit

Product Info

Voltage: AC220-240V OR AC100-130V

Power: 80W

Frequency: 50Hz/60Hz

Temperature Range: 180~500℃/356~932℉

Temperature Stability: ±5℃

Heating Type: Wmore Ceramic

Element Tips: 900M-B1.2

Wire Length: 1.4m / 55.12in

Size: Approx.242*25*25mm/9.6*0.98*0.98in

Weight: Approx.96g/3.4oz

Package Size: Approx. 254*55*35mm/10*2.2*1.4n

Package Weight: Approx. 139g / 4.9oz

80W Solder Kit

Package List :

1pcs 80W

5pcs tips ( I , B , K , 3C , 2.4D )

1pcs stand

1pcs Solder wire

1pcs heater

1pcs casing

1pcs Sucker ( De Pump )

1pcs Sponge

1pcs s ESD-15

1pcs Rosin

1pcs Solder WiCP-2015

1pcs Box

60W Solder Kit

Package List :

1pcs 60W

5pcs tips ( I , B , K , 3C , 2.4D )

1pcs stand

1pcs Solder wire

1pcs heater

1pcs casing

1pcs Sucker ( De Pump )

1pcs Sponge

1pcs s ESD-15

1pcs Rosin

1pcs Solder WiCP-2015

1pcs Box

Product Point

Pre the (+) on once to increase 1℃; pre and hold it to increase temperature continuously. Pre the (-) on once to reduce 1℃; pre and hold it to reduce temperature continuously. The newly set temperature will be saved after 3 seconds,and will keep the temperature for time powering-on.When (℉) or (℃) symbol fl, it means the heating core has not reached the set temperature.

Product Point

Temperature Calibration:

1.After 60 seconds of power on, put the ton a , and a moderate amount of solder on the tip; make the test point and the thave good touch.

2.When displays a stable temperature (about 2 seconds), write down the temperature.

3.Move away from ; pre the (-) and (+) on at the same time to enter temperature Calibration.

4.Input adjustment quantity. Adjustment quantity=set temperature - measured temperature (see example)

5.Pre the (-) and (+) at the same time to exit temperature interface, finished. Example 1, when setting temperature is 350℃ while measured temperature is 342℃, the correction steps are as follows: a.pre the (-) and (+) at the same time to enter temperature correction interface. b.pre the "+" on till the LCD displays 8℃ c.pre the (-) and (+) at the same time to exit

Product Size

Please do not touch the tand tube when the power is turned on.

Operational Attention

setting:

1.To pre the red and on both at the same time before it is power on, power on,after the LCD is working,stop to pre the on, you will enter the setting menu.The LCD shows (F) or (C)

2.Pre the on to choose C(degree centigrade) or F(Fahrenheit).Pre the Red on to choose Element U20(JCD01),U20(JC D02),U30(JCD03),U40(JCD04). 3.Preing the (-) and (+) at the same time to save your setting operation and quit the setting menu(finished) To protect the user from scald, when on the setting menu, it will stop heating.

Failure warning indication The LCD shows (OP): the heating element is open circuit.

Solution:

1.change the element.

2.To confirm that whether the pin of element is oxidized.

The LCD shows(E1):The outlet is poor contact,or thebattery source interfering the that it is power down.

Solution:

1.Unplug the .

2.Close the interfering source.

3.To use it far away from the interfering source.

Product Detail

All products are made of high quality materials and quality aurance.

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.