LCD Display myth 2000W Industrial Hair Dryer Air Gun Heating Gun Air Wrap Heat Gun for Welding Shrink Wrapping Hot Air Thermal Decapper

With the function of delayed shutdown, the hot air gun continues to blow cold air to cool the heating core, protect the heating core and prolong the service life

Insulated heating core ed from Germany

Mabuchi-Motor ed from Japan

Product features:

1. The double heating wire rises rapidly

2. Mica heat insulation of gun barrel is safe and reliable

3. ABS nylon engineering handle is comfortable to hold

4. Two gear wind speed regulation is suitable for many scenario

matters needing attention:

① When using the hot-air gun, try to use it in a dry p.

② When the hot-air gun is used or just after use, do not touch the nozzle to avoid scalding.

③ The handle of the hot air gun must be kept dry, clean and away from oil or .

④ After the hot-air gun is used, the air outlet is upward and can be stored only after the air gun is cooled.

⑤ Do not block or cover the air inlet and outlet of the hot-air gun.

Safety warning:

1. Don't use it as a hair dryer for blowing my hair.

2. Do not point the hot air gun directly at people or animal

3. Do not use near ins and e

Product s:

Working voltage: 220-240V / 50Hz

Power consumption: 2000W

Temperature range: 60-650 ℃

Temperature regulation mode: Key temperature regulation

Air volume: 100 / 300 L / min

Switch: second gear wind speed adjustable

Shell material: PP + 15% gla fiber

Rear cover shell material: ABS

Motor: Japan 365 Mabuchi-Motor

Heating cylinder: Luo iron plated material

Heating core: Gold mica plate + insulated heating core + jump switch + ceramic framework

Power cord: rubber power cord + European standard two plug 3C certification standard 1.8m (external 1.5m), including grounding

2-1.0 into the machine part, with an outer diameter of 6.8mm

blue-ray LCD high-end heat gun

Back LCD heat gun

LIAL LCD DISPLAY & TEMPERATURE CONTROL: Precise data control (±10℃/shift for Temp) with Large LCD Display for subtle operations. You can adjust the temperature and airflow as what you need.Strong Power With 2 Air Flow Settings:2000W super power and dual heating wire,provides strong power quickly heat up to 1112°F in seconds,Ul-high efficiency can meet your demands at any time. Two Air Flow Settings I:300L/min and II:500L/min(±50L/min) .High Quality and Safe:It has good temperature resistance.Our product also has the high temperature protection function, the heat gun will stop working when the temperature is too high,and the power cord has paed UL safety certification ,which can keep you safe while using.Various Nozzles & Acceories:Equipped with four heat gun nozzles,which can be used for shrink wrapping, , stripping, tube bending, BBQ, crafts, phone, car wrapping, stickers, etc.

dial display version manual

No dial display version

black heat gun version

With the function of delayed shutdown, the hot air gun continues to blow cold air to cool the heating core, protect the heating core and prolong the service lifeInsulated heating core ed from GermanyMabuchi-Motor ed from JapanProduct features:1. The double heating wire rises rapidly2. Mica heat insulation of gun barrel is safe and reliable3. ABS nylon engineering handle is comfortable to hold4. Two gear wind speed regulation is suitable for many scenariosmatters needing attention:① When using the hot-air gun, try to use it in a dry p.② When the hot-air gun is used or just after use, do not touch the nozzle to avoid scalding.③ The handle of the hot air gun must be kept dry, clean and away from oil or .④ After the hot-air gun is used, the air outlet is upward and can be stored only after the air gun is cooled.⑤ Do not block or cover the air inlet and outlet of the hot-air gun.Safety warning:1. Don't use it as a hair dryer for blowing my hair.2. Do not point the hot air gun directly at people or animals3. Do not use near ins and esProduct s:Working voltage: 220-240V / 50HzPower consumption: 2000WTemperature range: 60-650 ℃Temperature regulation mode: Key temperature regulationAir volume: 100 / 300 L / minSwitch: second gear wind speed adjustableShell material: PP + 15% gla fiberRear cover shell material: ABSMotor: Japan 365 Mabuchi-MotorHeating cylinder: Luo iron plated materialHeating core: Gold mica plate + insulated heating core + jump switch + ceramic frameworkPower cord: rubber power cord + European standard two plug 3C certification standard 1.8m (external 1.5m), including grounding2-1.0 into the machine part, with an outer diameter of 6.8mm