LED Dynamic Turn Signal Side Mirror Blinker Indicator Sequential Light For FORD MONDEO MK5 2014- MKV 5

 

LED Dynamic Turn Signal Side Mirror Blinker Indicator Sequential Light For FORD MONDEO MK5 2014-2020 MKV 5

Compatible with:
Fit for Ford Fusion (Not suitable USA) 2014-2018
Fit for Ford Mondeo 4th Gen. (International) 2014-2018
For Ford Mondeo MK5 2014-2019 MK V 5

























Notice: Not fit North American model or South American model!!!



























Package included:2x Side Mirror Turn Signal Light( Left and Right).
 
 
Note:
The yellow turn signal is plug and play install, very easy and convenient.
For the blue light function, your first choice is to connect with the puddle light power if you have.
Or you connect with the side mirror flip power.
If you don't have all these two function, then you have to open the door panel to connect with the positive to get power, it is a little bit complicated.
Anyway,  you can just use tape to pack it and let it be or cut the green wires off , use the yellow turn signal only.
 
 
Material: ABS
Light color: Blue/Yellow Dynamic Turn Signals
Long lifespan, More Safety, 100% Waterproof
Installation Instruction is NOT included.

Product Advantages:
Plug and play, No wiring, No coding!
Error free!
Dynamic sequential, much sport!
Brighter than original one!

Dynamic turn signal,scroll smoothly.Easier to be seen by other drivers when you are turning right/left.

1.Please check our pictures to ensure ours match with the wing mirror on your vehicle.
2.Please allow slight manual measurement deviation for the data.
 

For the blue light function,
1. Connect with the puddle light power. after the car is unlocked or locked, then dynamic blue light will be on for 5-15 seconds.
2. Connect with the side mirror flip power. after the car is unlocked, then dynamic blue light will be on for 5-15 seconds.
3. Open the door panel to connect with the positive to get power. after the car is unlocked or locked or the turn signal lamp is turned off, then dynamic blue light will be on for 5-15 seconds.
Anyway, you can just use tape to pack it and let it be or cut the wires off , use the yellow turn signal only.

There are three connection methods to achieve the dynamic blue effect, and different methods have different effects:

 

˃ Connect the positive pole of the puddle light power supply. after the car is unlocked or locked, then dynamic blue light will be on for 3-10 seconds.

˃ Connect the positive pole of the rearview mirror flip power supply. after the car is unlocked, then dynamic blue light will be on for 3-10 seconds.

˃ Open the door panel to connect with the positive power wire. after the car is unlocked or locked or the turn signal lamp is turned off, then dynamic blue light will be on for 3-10 seconds.

Anyway, you can just use tape to pack it and let it be or cut the wires off , use the yellow turn signal only.