Led Fountain Lights aluminum alloy 6W 12W 18W IP65 Pond Submersible pool lights Garden el LED spot lights

6W 12W 18W Outdoor LED Pond light IP65 Waterproof LED fountain light AC/DC12-24V Underwater Swing Pool lamp water Spotlight

Description

1. Adopt nslucent : Light nsmittance 95%, e the light effect more even and good2. Stainle Steel Body, Anti-corrosion/cracking, ble and No Fade3. Easy to Radiating4. Precision silicone mat, improved waterproof design

:

1. Power: 6w 12w 18w

2. Voltage: 6w model: AC/DC 12v; 12w and 18w model: AC/DC 12- 24v

3. Lumin: 90-100LM/W for white light/warm white model

35-40LM/W for RGB model

4. Material: Stainle Steel + Tempered gla

5. Waterproof Grade: IP65

6. Cable Length: 30cm

7. Application: Pool, Lanscape, Fountain

8. Regarding RGB Model , no remote control included , it will change colors automatically .( 6w rgb: 2red chips+2green chips+2blue chips; 12w rgb : 4red chips +4green chips+4blue chips ; 18w rgb:6red chips+6green chips+6blue chips)

Note:

Due to the difference between different monitors, the picture may have some difference with the actual color of the item. Thank you!

Pckage Include:

1 x Underwater LED light

Installation instructions:

1 Fix the underwater lights firmly.

2 Connect the cable on reliable connection.

3 Confirm the installation is correct, then there will be no electrical short circuit. Wrap unused connectors with waterproof tape . Then acce the appropriate nsformer.

4 You can choose to install a larger number of branch-powered underwater lights, please consider the current load and power cable voltage drop acro each branch, and choose the appropriate size of the cro-sectional area and length of the cable.

5 If any problem occurs during installation, please consult technical staff or contact us.

Note:

1 Before installation LED underwater lights, you must first turn off the power. This is the first step of all electrical equipment installation, and is the basis for safe operation.

2 In order to leave better heat diipation of LED underwater lights, the lights are suested to be pd below the surface.

3 In order to achieve a good LED underwater lights waterproof effect, the protective effect LED underwater lights should reach IP67 or more lamps can be pd above the water 5 meters or le.

4 LED underwater lights have an active clamp, adjustable angle for light position. Chais screws can be used. Wiring general underwater lights at the head of the best on the water, power to do joint waterproofing treatment.

5 the control system is designed by the engineer when used under normal operating conditions and typical color-changing effects after using, you can achieve the most optimized LED life, outside of these ranges or conditions, or long-term work in these upper and conditions will further reduce the life of the LED, in extreme cases, the internal light source aembly malfunction.

6, During the installation of lighting, please be gentle to avoid any damage to the lighting fixture.