LiitoKala Lii-500 LCD Screen Display Smartest And NiMH Charger 18650 26650 Eurocode

Specification:
Product?name: LiitoKala Lii-500 1.2V/3.7V Charger Brand: LiitoKala Model: Lii-500 Input voltage: 12V / 2.0A Discharge current: 250mA, 500mA Li-ion charging current: 4.2V 300mA / 500mA / 700mA / 1000mA NiMH charging current: 1.48V 300mA / 500mA / 700mA / 1000mA Compatible Batteries: 18650,26650,14500, AA, AAA, etc.(not included) USB Output: 5V --- 1000mA Termination: Intelligent voltage monitoring Weight: 305g+120g+32g Size: 162mm(L) x 96mm(W) x 36mm(H)
Features:
1. Four kinds of charge current regulation (300mA / 500mA / 700mA / 1000mA)
2. It can be of different size batteries while charging(18650/26650……/AA/AAA)
3. The charger preclude the use of a separate screen LCD display, voltage (V) Current (mA) Time (h) Capacity (mAh) resistance (mR)
4. Under charge mode, 4 work independently, you can select different charging current for charging and Hunching -ion batteries and nickel-metal hydride batteries.
5. FAST mode, 4 channels can quickly detect the capacity, regardless of the -ion batteries and nickel-hydrogen batteries, are working independently. Rapid of capacity process (1 discharge, 2 full) by the two step
6. NOR mode, the capacity is normally detected by the three step process (1 first charged, then discharged 2 and 3 refill), the process of the capacity;
7. CHARGE and FAST / NOR 3 modes can work simultaneously; independent set charge / fast capacity / normal capacity ;
8.? A variety of protection functions: overcharge and over discharge, short circuit, temperature, 0V voltage activation function, (- ΔV
2. Hold down the MODE key in any case and held for 3 seconds to change the CHARGE (charge) mode or FAST , NOR (capacity ) mode, then tap again corresponding to the function keys can be changed within 8 seconds, to current, independent, Hunchong, capacity , the selected function after 8 seconds into the working state, in working condition can tap the (1234) key to view the current (mA) / capacity (mAh) / voltage (V) / time ( h) / resistance (mR) data reference.

Description of the mode:
(A) CHARGE (charging mode)
? ? 1. When the is turned charger, the charger all instant full brightness LCD screen, if the is not placed in the display Null, if it is a bad will also be displayed into the Null;
? ? 2. Insert the batteries charger, the charger in three seconds or so to measure the internal resistance of the , after which the system automatically enters charge mode (CHARGE), the charger automatically default charging current is "500mA, in 8 seconds within the current selection by key () select 300mA, 500mA, 700mA, 1000mA current charging system lock current that you select will be charged in eight seconds, if within 8 seconds, did not make the set, then the system automatically defaults to 500mA charging current, current and functions at this time will not be changed, if necessary change, need to change the mode button press from the election;
??? 3. In the charge mode (CHARGE), within 8 seconds to change any of independent charging or different current selection, as well as different Hunchong. make a simple, 8 seconds tap the corresponding button 1234, press mode button to change the mode, press the current key to changing the current, independent, Hunchong, capacity function, selected after 8 seconds into the working state, attention according to the capacity size to select the charge current, if not fast charge, we recommend charging 500mA, this is the safest;
? ? 4. charging mode, by tapping the keys you can switch to view the 1234 charge capacity (mAh) / charging time (h) / internal resistance (mR) / charging current (mA), voltage (V) 5 kinds of units, the is fully charged After the show, (end of charge);
(B) FAST (rapid capacity mode)
? ? 1. When the is turned back into the charger, 8 seconds touch (mode key MODE) Select (FAST rapid capacity mode), then press (current selection key ) to select the current system 8 seconds after the lock of your choice to work. Quick Reference Table a capacity procedure is the first is discharged, then the is fully charged in order to detect and record the capacity.
? ? ???Note that this product capacity mode, the discharge mode is divided into two kinds, when you select the charge current (300mA, 500mA), the system automatically default discharge current of 250mA, when you select the charge current (700mA, 1000mA) , the system automatically default discharge current of 500mA,
?(B) NOR (normal capacity mode)
???? 1. NOR mode: is the first is full, then the discharge discharge capacity to detect and record the capacity after the is fully automated; capacity process with reference to Table II
???? 2. When the is turned back into the charger, 8 seconds touch (mode key MODE), NOR mode is selected, in any mode, press mode button for 2 seconds, you can enter NOR mode;
???? 3. After entering the NOR mode, you can select the current key () select 300mA, 500mA, 700mA within 8 seconds, or 1000 mA current, the current system is locked after you select in 8 seconds, if in this 8 the second, did not make the set, then the system will automatically lock 500mA current charging (when selected current is the default charging current is automatically selected when the discharge discharge current 250mA), in which within 8 seconds, Select 700mA or 1000mA current charge, will automatically select the discharge current of 500mA discharge.
???? 4. When the is full, the system automatically to discharge, the discharge current to system defaults (select the charging current relationship), and record discharge data to detect the capacity, when the screen appears, capacity mode is finished, At this LCD display is the actual capacity of the reference value;.
???? 5. capacity mode is finished, the charger will be selected current again before charging the until full.

Warning:
1. This charger can charge a cylindrical -ion batteries and nickel-metal hydride batteries, non-rechargeable iron phosphate ;
2. Before use, please carefully refer to the instructions, pay attention to the recommendation of the charging current, do not exceed the recommended charging current;
3. Do not use adapter;
4. Chargers discharge may be hot, be careful not to burn;
5. Stop use, unplug the , removing the ;
6. it can be used in normal room.
7. This product data for reference , please refer professional .

Package inlcuded:
1 X LiitoKala Lii-500 1.2V Or 3.7V Charger
1 X 2A adapter
1 x Car charger
PLS NOTE: Black for US Plug Blue for EU Plug Red for UK Plug As Pictures
,,,,,,



a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a