Mini Mending Sewing hines ABS Needlework Hand-Held Devices Portable Clothes Quick Home Supplies Handwork Devices

Mini Sewing hines Portable Needlework Hand-Held Devices Quick Repairs DIY Clothes Household Crafting Mending Handwork Tools Acceories Specification: Material: ABS Size specification: 11 x 7 x 4.5cm/4.33 x 2.76 x 1.77in Packing method: color box Color: Red, Blue, Pink, White Instructions: 1. Hold the hine: Hold the hine base with four fingers of your right hand, and place your thumb on the top of the top cover of the hine naturally to hold the hine steadily. 2. Threading: Pull out the thread on the spool gently. Pa the lead loop again. Place the threaded thread next to the needle, and put the threader through the needle hole from the front of the needle (toward the body joint), and then introduce the thread into the small hole of the threader, exit the threader and pull out the head thread for about 2 -3 cm, pre the line plate to be ready for use. 3. Put the cloth: use the index finger of your right hand to lift the preure plate, put the ready-to-sew fabric (thickne no more than 0 mm) under the preure plate, and gently put the preure plate back to pre the fabric. 4. Sewing operation: hold the fabric with the left hand, pre the top of the upper cover gently and quickly with the thumb of the right hand, pre down again with the thumb, and repeat the proce, the cloth feeding mechanism will automatically send the sewing material to the left. Hold the right hand of the hine and gradually move it to the right, and gently move the sewing object to the left in acconce with the sewing rhythm in the left hand until the sewing ends; cut the thread with sciors, and gently pull up the preure plate to take out the fabric. Pull out the last section of thread from the back of the fabric to be sewn, make it pa into the next section of cycle, tighten and tie a knot, the stitches will be firm; do not pull the fabric to break the thread at the end of sewing head, so as not to damage the needles and pins of the hine. 5. This hine can automatically feed the cloth and adjust the tightne between the stitches, but it is neceary to pay attention to the following points: if the stitches are too tight, adjust the preure nut slightly counterclockwise; if the stitches are too loose, adjust the preure nut slightly clockwise; tie the correct stitches tightly. If you need larger stitches, you can use the left hand to pull the cloth a little faster. If the stitches are denser, the left hand pull cloth can be slightly slower. 6. Change the thread group: If you change to a large thread group, you can connect the spare extension rod to the spool shaft and sleeve it into the large thread group. Place the spare plastic cap at the end of the rod to fix the large thread ball, then rethread the thread, adjust the tension of the thread and sew; use cotton thread or synthetic thread for the best effect. 7. Change the needle: loosen the fixing screw and take out the broken needle. Install the new needle as shown, and pay attention to the flat surface of the needle and the fixing screw, not re. Pocket size, manual operation, this sewing hine has the function of automatically feeding cloth and adjusting the tightne between the stitches to achieve profeional results; the product adopts exquisite color gift pack, in addition to being ideal for family daily use, it is also suitable for gifts and conference gifts, etc. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the tures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 x Mini Sewing hine

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.