Pine64 Pinecil Iron Portable Mini USB Interface For Welding tools constant temperature Intelligent maintenance Electr

Description

The Pinecil is a smart mini portable iron with a 32-bit RISC-V SoC featuring a sleek design, auto standby and it heats up to an operating temperature in just 12 seconds!

Dual power input design: 1) USB-C supports both PD and QC 3.0 and; 2) DC5525 barrel DC jack.

Speedy Rapid Warmup: Reaches operating temperature in 12 seconds. Support for on-demand rapid boost feature.

Adjustable ttemperature which can be set between 100° C and 400° C using the adjustment ons and an easy-to-read OLED display.

Portable: it features a sleek and slim design, comprised of an SAE 304 stainle steel core housed inside a polycarbonate shell.

Auto standby mode engages when it is not in use ensuring the user safety.

PACKAGE

Dimensions: 17cm x 12cm x 2.3cm

Weight: 88 gram

BODY

Dimensions:  170mm with solder t/ 98mm without solder tx 12.8mm x 16.2mm

Weight: 30g with solder t/ 20g without solder tip

Build:  Plastic with metal cl(Handle)

Color: Black

PLATFORM

OS: Ralim's IronOS build

Chipset: GigaDevice GD32VF103TB

CPU: 32-bit RV32IRISC-V "Bumblebee Core" @ 108 MHz

DISPLAY

Type: OLED White Colour Monochrome Display

Size: 0.69 inche

Resolution: 96x16pixel

MEMORY

Internal Flash Memory: 128KB

System Memory: 32KB SRAM

Expansion: None

POWER PORTS

USB type C: PD and QC 3.0 12V-20V 3A

Barrel Jack: DC5525, 12V-21V DC 3A

FEATURES

Capable received power from either USB-C port or barrel jack.

GPIO break-out thru USB-C port

Package includes :

1x Pine64 Controller

1XSolder Tips as you choose

FAQ: 1. Why the temperature of the new T12 / TS solder tis jump? Because the inside heating core of the new T12/ TS solder tdid not go through the high temperature, so the first time to use will be a bit of temperature, generally without special treatment, the normal use of 1-2 days after the basic will not bounce. Such as the need to immediately effective, the general proposal to adjust the temperature to 380 -400, side of the solder tto the tof tin, burning 5-10 minutes after the shutdown, until the solder tof the cooling and then re-boot! (if 1 times no effect, then can be repeated 2-3 times). T12/ TS is pulsating temperature warming, even if the display temperature is flashing, the tof the real temperature is completely stable.T12/ TS jump temperature also are connected with the temperature control board of procedures, power of electrostatic and if it connect the ground. 2. What the problem of attention when we use the T12 / TS first time? T12 theating speed is very fast, when the new solder tconnect the electricity, it must be tinput immediately to the solder tip, for protection, due to heating up fast, just need 6-10 seconds, no have more time to you for preparetion. so the ant is prepare the itwhich will be welded, and finally boot power, and each welding gap or the end, should be more on the tin to protect and then shutdown, so it can avoid to tin the new sold tis difficult, especially the T12 ttype of iron, such as T12-I / T12-IL / T12-BL / T12-ILS and so on! 3.What are the precautions for using the T12 / TS tip? a. If can use low temperature, then do not high temperature: T12 / TS is constant temperature control, the general recommended working temperature control between 300 ~ 380, higher than 380  damage the coating of solder tand cut down the PTC life! b. Do not dry: the first time to use solder tip, should be wrapped while heating a layer of tin. If it's without work, at once shutdown! c. Diligent to clean: before shutting down, use a wet sponge or detin the ball to remove the tof the oxidation of debris, on the tin after the shutdown power off! d. Standard operation: Do not violent collision the solder tip, do not stamp the top of the hard objects, but can not be used to hot plastic and other materials, specifically reminded that friends like tin should avoid the iron and other hard metal knotin, the heating core of T12 is in the head of the solder tip, often percuion is a fatal damage to T12 / TS! e. Le use of scaling powder: scaling powder can not be used, can be used as le as poible! When scaling powder help make beautiful and reliable welding at the same time, but also greatly speed up the consumption the coating of the solder t, T12 heating core high temperature position is very near of the Nozzle tof the solder tip, Scaling powder in the fear of threat to T12 head preing parts.

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.