Portable VNA SWR 6GHZ Vector Network Analyzer Reflectometer

Detailed Information About The Product:

GS-320 Hand held vector network analyzer VNA (reflectometer) 23-6200 MHz is designed to measure the matching characteristics of passive and active radio devices (antennas, cables, filters, attenuators, amplifiers, etc.). The device allows you to measure the parameters of the complex reflection coefficient, standing wave ratio (VSWR), impedance, admittance, magnitude, phase, loss and distance to fault in the cable.
GS-320 casing is made in a durable material in the form of mobile autonomous instrument and is primarily intended to work directly on the object, as with low weight and compact dimensions has a low energy consumption. The analyzer will be especially useful to companies working in the field of telecommunications, engaged in the installation and maintenance of antennas, in the amplification of cellular communication, etc.
With it, service centers and repair crews can carry out RF analysis cable and antenna when carrying out commissioning or repair work. In addition, the device is perfect for workshops, radio amateurs, educational institutions and laboratories. The device has a 3.2 inch color resistive screen to display the measurement results and control the device. For example, you can use the instrument to do the following: To perform impedance matching using the Smith chart.
To measure the standing wave ratio. To measure the attenuation in the cable. To measure the distance to fault or irregularity in the cable. Advantages of vector network analyzer GS-320 23-6200 MHz: color touch screen with a diagonal of 3.2 inches allows for quick configuration of the scan parameters and display of measurement results. wide operating frequency range: 23 MHz to 6200 MHz
high scan rate of 1000 points/s. high precision of measurement: 0.25 dB and 1.5°over the entire frequency range. the ability to display up to four independent markers on all charts, allowing an accurate assessment of the measured parameter. display almost all possible interpretations of the reflection coefficient. the ability to measure the distance to fault and loss in the cable. supportsoftware of PC, can be controlled through PC interface(The software of PC can be obtained from dealers)

SPECIFICATIONS:
Operating frequency range: 23-6200 MHz
The frequency resolution: 10 kHz
Maximum number of scan points: 1000
Scanning rate: 1000 points/s
The direction of the bridge, uncorrected throughout the range: Greater than 12 dB
Directivity effective (after full single-port calibration): Greater than 50 dB
The standing wave ratio at the input: Less than 2
Phase measurement precision1: Greater than 1.50
Magnitude measurement precision1: Greater than 0.25 dB
Resolution determining the distance to fault2: (C x VF)/2S m
The maximum length of the measured cable3, with VF =1: 3000 m
Maximum DC input voltage: 25 V
Operating temperature range: 0...+40℃
Screen diagonal: 3.2inch
Screen type: touch resistive
Screen resolution: 320х240
Battery capacity: 4000 mAh
Continuous battery life4: ~4 h
Battery charge time: ~6 h
Material: metal+plastic
colour: multicolor

Package Contents:
1 x Handheld Vector Network Analyzer 23-6200 MHz
1 x Typc-USB connection cable
1 x SOL Calibration Kit
1 x N female to SMA male adapter
1 x Touch screen pen
1 x RF Test Board Kit

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !