PTFE Tape/PTFE Tape for Vacuum Sealer Machine,Hand and Impulse Sealers 2 Inch x 33 Feet

Fits virtually all vacuum sealers, as well as most models of hand / impulse heat sealers
Replaces deteriorated or burnt-out PTFE tape, which is a crucial barrier between the heating elementsand the bag. Old tape causes poor bag sealing and can lead to a broken heating elementsand a broken sealer
Tape may be slightly wider and longer than necessary, allowing for broad compatibility. Strip should be replaced when appearing warn, discolored or if sealing isn't perfect
Just peel tape from the roll and place on the correct area (you may need to clean the strip location before placing the new piece of tape). Over the wire for vacuum sealers, under the wire for impulse sealers
Comparing with common tape, this PTFE tape is more heat and cold resistant. it has good effect in insulation for high voltage; there is no chemical reaction for chemical medicines or agents and solvents; It possesses resistance for light, oxygen, wear-resisting, anti corrosion, unordinary smoothness, good paste ability and other advantages.
Colour:Light brown
Material:PTFE
Size:Width: 5.0cm
thickness: 0.18mm
length: 10m
Package Contents:
1 x roll PTFE Fabric Tape
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.