Raspberry Pi PICO RP2040 Development Board Onboard 1.28inch Round LCD Touch Display Screen Accelerometer Gyroscope Rs

Note:On-board with RP2040 microcontroller , Which mean you do not need a raspberry pi pico board to control it

Note: Bundle:RP2040-LCD-1.28 No Touch

Overview

RP2404-LCD-1.28 is a high-performance microcontroller development board. Under the condition of small board type,

On-board 1.28inch LCD, lithium battery charging , six-axis r (three-axis acceleration and three-axis gyroscope) and other peripherals,

AlPIO and Debug interfaces are introduced, which is convenient for users to develop and embedded in products.

Specifications

RP2040 microcontroller designed by Raspberry Pi in the United Kingdom

Dual-core Arm Cortex M0+ proceor, flexible clock running up to 133 MHz

264KB of SRAM, and 2MB of on-board Flash memory

USB-C connector, keeps it up to date, easier to use

On board a 1.28-inch LCD screen

AlPIO's (30 in total, but some pins have been connected to the internal bu circuit, so please pay attention when multiplexing. Please refer to the details) are led out by 1.27-pitch bus bar.

USB 1.1 with device and host support

Low-power sleep and dormant mode

Drag-and-drop programming using ma storage over USB

2 × , 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channel

Accurate clock and timer on-

Temperature r

Accelerated floating-point libraries on-

8 × Programmable I/O (PIO) state machines for custom peripheral support

On-board lithium battery charging and discharging interface is beneficial for RP2040-LCD-1.28 to be used in some mobile scenes.

C/C++, MicroPython Support

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

Dual-Core Arm Proceor

Dual-Core Arm Cortex M0+ Proceor, Flexible Clock Running Up To 133 MHz

30 × Multi-Function GPIO Pins

Configurable Pin Function, Allows Flexible Development And Integration

What's On Board

USB Type-C connector

ETA6096 High-efficiency lithium battery charging

Battery interface MX1.25 connector, which can be used to acce 3.7V lithium battery and support charging and discharging.

4.QMI8658C Six-axis inertial measurement unit (IMU), including a 3-axis gyroscope and a 3-axis accelerometer.

1 .27mm spacing row

W25Q16JVUXIQ 2MB NOR-Flash

RP2040 dual-core proceor, up to 133MHz operating frequency

RESET on

BOOT on pre it when resetting to enter download mode

Outline Dimensions Package Contains Bundle: RP2040-LCD-1.28 No Touch Bundle: RP2040-Touch-LCD-1.28 About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.