Rechargeable Electronic Shock Collar Stop ing Full Waterproof Pet Anti Control Dog Collar iner X888

Rechargeable Electronic Shock Collar Stop ing Waterproof Pet Anti Control Dog Collar iner

FullWaterproof:SwingandDivingCollar​Note:This Anti isn't very sensitive， it can work, but it need large and enough power, if you think it is a problem, you can choose other mode.

Main features:

1. 6 intensity levels for a wide variety of dispositions

2. Easy testing method to check the No Collar

3. Full Waterproof and Rechargeable (dog can swim in water)

4. On/off and select the intensity level of stimulation

5. Off position is to turn off the Collar

Princes of operation:

The Anti- Collar stops ing with progreively increasing sound and shock which is controlled by a microproceor distinguishing your dog's from other environmental noises and automatically delivers sound and shock after each .

To protect the dog, if the continuous stimulus reaches the 7 levels, then the collar will stop working for 1 Minutes.

The use of the warning tone followed by increasingly intense tones and shocks sets up a pattern that your dog will quickly learn is caused by its own ing. It takes time to break bad habits.

ON/OFF MODE:

1. Turn on collar by preing (On/Off) on for 4 seconds, then the red LED light will be turn on.

2. When the collar is working, the red light will be fing.If the dog does not over 2 minutes, it will turn to the sleep mode and the LED will turn off.In the sleep mode, the collar will activate the automatically

3. Turn off collar by preing (On/Off) on for 4 seconds, then the red LED light will be turn off.

To set the Static Correction Level mode choose:

Read all steps before attempting to set the Static Correction level.

collar have 6 intensity levels for a wide variety of dispositions (1-6 Level).

1. The collar green LED indicator light will emit a series of fes representing the Static Correction Level.

2. Increase the Static Correction level by preing and releasing the Correction Level on within 5 seconds of the previous series of fes.

How to charge the Collar:

1. Connect the charger connector to the charging .

2. Plug the charger into a standard outlet (DC-5V). The green LED light will be f.

3. After fully charged, it will be turned to green LED light automatically.

4. When charging is completed, put back the rubber cover to keep charging clean.

5. Low battery indicator: the Collar will keep beeping for 2 minutes unle it gets charged.

Note: Please check whether the battery needs to recharge before you use it. When you turn on the receiver, if there are beeps for 2 minutes, you need to recharge it before using.

The receiver can be increased.