S Handle Connector For Onexplayer 2 PC Game Console Laptop Connector For Video

modname=ckeditor

s Handle Connector For Onexplayer 2 PC Game Console Laptop Connector For Video Game Consoles Computer Replacement Parts

NOTE:Please Check You Need HALL  or ALPS ，  H=HALL Version   A=ALPS Version

Method Check the SN barcode letters on the back bracket of the hine H /A

Connector First use requires pairing calibration, please refer to the manual

NOTE:First use must be paired! calibration, Please read the instruction manual and operation manual carefully!

FRONT:Power on:Long pre 2s to turn on/off the handheld connector; Short pre to go to sleep/wake up the handheld connectorPair on: Short pre to enter pairing statusBACK:Pre the ker to bring up the receiverSignal Receiver Organizer

Product bottom: Type-C charger port

Handle disaembly: Long pre the back of the handle on, the handle gently to disaembly at the same time.

Operation steps:Step 1: handle's default state (Xbox360 handle mode), while long pre the [Back] on + [Start] on for about 5 seconds, they can be released when the LED light blinks;Step 2: first let left and right to the maximum tilt angle gently rotate 3 circles to calibrate the ,and then pre the left and right trigger ons for 3 times to calibrate the motor;Step 3: pre the Y on to save and exit the calibration mode.When left and right handles are succefully connected to the connector, the LED light is always on when the connector is on; long pre the [LED] on to turn on/off the LED light.Note:The handheld connector will record the LED light status and keep last time LED light status when turning on/waking up again.The stand has a built-in and can be connected to the OneXPlayer2 host through the receiver. Pairing is required for the first use, and after succeful pairing, the stand will automatically connect to the receiver when it is turned on for subsequent use, no need for further pairing.You need to pair it with the receiver when it is used for the first time. Steps as below.1. Keep preing the power on 2s to turn on the connector, enter the signal search state, then the Pair on indicator (green) fes rapidly, fing an interval of about 1s.2. Pre the Pair on to enter the pairing state, then the Pair on indicator (green) blinks slowly fing interval of about 2s.3. Plug the receiver into the USB-A port on the OneXPlayer2 host, the connector will be automatically paired with thereceiver for connection, after the succeful pairing connection, the Pair on indicator (green) is on.About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.