SENNESAI EW-G4 Professional Dual Wireless Microphne Stage Performance 2

EW-G4 9000 descrtion

FEATURES:

UHF band transmiion signal, the frequency range 635Mhz-695Mhz

Receiver and are equped with LED display

The back of the receiver is equped with 2 rubber to enhance the received signal and highlight the appearance of high-grade

Contained one 6.3mm outputs and one balanced output, suitable for connecting a variety of external device

Microphone power consumption is 130mA, using 1.5V AA*2 battery power supply, can be used for more than 6 hour

Using distance: about 190ft-260ft

Audio and data use 32bit transmiion and independent ID code, effectively prevent crotalk and interference

and receiver use 8bit infrared transmiion synchronization mode

Use high fidelity moving coil microphone , so that your voice is more clear and real

SPECIFICATIONS

System parameters: EW-G4

Audio frequency response: 80-17KHz

Dynamic range: ≥ 60dB

System distortion: ≤1%

Signal to noise ratio: ≥ 60dB

Ideal distance:190ft-260ft

Operating temperature range: 5 ℃ -4.5 ℃

RECEIVER

Receiver sensitivity: 40dB

To increase: 50μS

Audio output impedance: 600Ω

Audio output level: 0-0.5V

Use power: AC100-240V 50 / 60Hz

Power consumption: 3W

Volume: 240mm X 135mm X 42mm

Frequency stability: ± 0.005%

Carrier output power: ≤ 30Mw

Spurious radiation suppreion:>40dB

Modulation: UHF

Maximum modulation: ± 75KHz

kup mode: moving coil

Use power: 1.5V

Battery power consumption: