Sharbat HD Clear Frame Magic Color Electroplating Waterproof Anti-Fog Swimming Equipment Glasses Men and Women Plain Myopic Swimming Goggles

[Brand] SBART

[Item No.] 1605af-1

[Color]]Magic color(See Physical Picture)

[Tips]]

1. Anti-Fog Treatment Has Been Done in Glasses.Please Don't Touch It with Your Hands, Let Alone Clean It inside. If the Water Enters Accidentally, Please Get Rid of the Water and Blow It Dry and Save It.

2.Don't Pull Your Headband Very Tight. If You Pull It Very Tight, You Must Raise Nose Buckle Places and Get Water Instead.

Due to Refraction in the Water, We Recommend That You FollowUsually Wear Glasses Degrees minus 50-100 Degrees;If You Have Astigmatism, You Can Add 2 to the Degree of Myopia According to the Degree of Astigmatism.For Example, the Degree of Myopia Is 500, the Degree of Astigmatism Is 100, and Your Degree Is 550 Degrees. It Is Better to Choose 500 Degrees Prescription Swimming Goggles.

[How to Maintain Or Restore the Anti-Fog Effect]]

1.The Lenses Are Hydrophilic. Please Soak Them with Clean Water before Using Them,Better Anti-Fog Effect.
2.During the Process of Wearing, Cleaning Or Using, Avoid Touching and Smearing the Anti-Fog Surface in the Mirror with Nails Or Fingers,Prevent the Lens from Scratching and Damaging the Anti-Fog Effect.
3.After Each Swim,Please Rinse with Clean Water to Avoid the Anti-Fog Effect Caused by Oil Dirt Covering and Killing.
4.After Each Swimming, the Anti-Fog Function of the Mirror Will Be Affected Due to Personal Sweat and Oil Dirt in the Swimming Pool. At This Time, You Can Use Neutral Detergent to Add Water and Gently Rub the Foam with Your Fingers, Then Use Your Fingers to Touch Some Foam and Gently Wipe the Goggles to Clean the Oil Dirt.(Note: Before Lightly Wiping with Foam, the Lens Should Be Soaked in Water First; When Lightly Wiping with Fingers, Avoid Scratching the Anti-Fog Film on Your Nails.);Then Rinse with Clean Water to Remove Oil Dirt and Restore the Anti-Fog Effect.
5.Because the Anti-Fog Effect in Goggles Will Be Reduced after Long-term Use and Cleaning. If the above Methods Still Fail to Effectively Prevent Fog, Antifogging Agent Can Be Used to Enhance the Anti-Fog Effect; you Can Also Apply Saliva to the Mirror Surface of Swimming Goggles.(No Need to Rinse with Clean Water),However, These Methods Can Only Prevent Fog for a Short Time and Cannot Maintain the Anti-Fog Function for a Long Time. However, They Can Prolong the Use Time of Swimming Goggles. However, before Each Use, You Must First Check Whether the Mirror Surface Has Oil Dirt, and Clean It According to the Normal Neutral Detergent Foam.

.