Shutter 3D Gles Dlp-link LCD Rechargeable Virtual Reality LCD VR Gl Compatible For XGIMI H2 Horizon Halo Aura Projectors Bla

Description: Product name: 3D Glaes Charging time: about 2-3 hours Power on: Pre the on, the green LED light flashes to indicate that the glaes are powered on Power off: pre and hold the on for 3 seconds, the green LED light flashes 3 times Standby state: If there is no 3D signal for about 5 seconds, the glaes will automatically enter the standby mode, and the green LED light will flash every 5 seconds USB charging: the red indicator light is on when charging, and goes off when fully charged Low battery mode: When the 3D glaes battery is low, the green LED light flashes five times continuously, then flashes twice every 10 seconds. This means you have to charge Applicable method: Use 3D glaes, first pre to turn on, the second pre to adjust the picture quty, keep the 3D effect on the glaes until the picture is clear. (When playing video on the projector, you need to choose up/down 3D or left/right 3D effect)

Packing list: 1 x 3D Glaes 1 x Charging Line 1 x Instructions 1 x Packing Box

Note: 1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding. 2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.