Spot Welder Machine Welding Pen DIY Portable 12V Battery

1. The circuit board of this spot welder can be used for welding 18650/26650/32650 lithium batteries. Advantages: portable, stable, reliable and durable.
2. Users need to bring their own 12V battery for power supply, the welding current is about 90A~130A, and it is easy to weld the common 0.1mm~0.12mm nickel plated sheet. Please make sure that your battery can have a current greater than 90A, otherwise you will not be able to weld!
3. A battery with a large discharge current will directly affect the welding effect. The following batteries are recommended: 20-45ah Lead-acid batteries with good performance and small internal resistance (internal resistance less than 10 milliohms, discharge current greater than 90A), such as a new car starter battery! 3.5-5.5ah 3S model airplane lithium battery pack around 45C; 30-35ah capacity 18650 battery pack.
4. Power requirements: Spot welding is welded by the principle of rapid local heating and cooling by high current, Need sufficient current supply, generally 0.1-0.15 nickel plated sheet welding current About 90-150A, so the working power of the circuit board must be greater than or equal to 150A.
5. The following battery packs can be used as working power: 12V car starting power supply, 3S high-rate battery pack for model airplane, three-string high-rate lithium battery pack, 40900 3-string battery pack, lead-acid battery with good performance above 12V 20A.

Calculation formula: capacity X discharge rate = load capacity
Take 4000ma aeromodelling battery as an example, the discharge rate is 45C (4AX45C = 180A)
Instructions for use:
Function buttons: 1, used to switch the machine, 2 used to switch gears!
When the power is turned on, the default is the first gear. Press the button for 2 seconds to release
The gear is increased by one gear, and the buzzer sounds and the LED flashes corresponding to the number of gears.
For example: the 3rd gear, the buzzer sounds three times, the LED flashes 3 times, a total of 5 gears. The spot welding intensity is gradually strengthened from the 1st gear to the 5th gear
5 is the strongest!
After the 5th gear, press and hold the button again. It will power off. In the off state, press and hold the button to power on, and the gear will return to the first gear
colour: black
Material: PCB+plastic+metal

Package Contents:
1 x Circuit board
4 x Bronze noses
4 x Screws
1 x Buzzer
1 x nickel sheets
1 x Capacitor
2 x Welding pens
2 x Input wires
2 x Heat shrinkable tubes

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !