SQ001 Mini Smart portable 65W Electric Station With TS100 iron t100-400 °C weldding tool without power

Note:this product is NO- TS100 station

Specification:

Model name: SQ001

Color: Black, Blue (we will send to you if you haven't leave a meage for itcolor.)

Power output：65W

Temperature range: 100-400 °C / 212-752°F

Factory default temperature:  300  °C / 572°F

Power supply: DC 24V  5.5 * 2.5mm standard interface

Preset temperature                            300℃(Initial setup)

Power saving temperature                 200℃(Initial setup) Operating voltage     Power                The fastest time to heat up  (from30 ℃ -300 ℃ )

16V                    30W                       20s

19V                    40W                       15s

24V                    65W                       11s

Universal interface expand the of application

Super Light weight  & mini size (with iron tips aembled):  31g / 172mm

Multiple choice of power supply

Pls use fixed power adapter to drive SQ001.

The Advantage of Mini TS100 Upgraded Version SQ-001

MINI SQ-001 Electric iron is an upgraded version of TS100 internal heat intelligent numerical control iron. Lightweight design, easy to install and use, easy to remove and store, comfortable control handle, high-efficiency heating end, simple control interface. It is a favorite tool for electronic engineers and electronic maintenance enthusiasts.

It can work in DC 24V, OLED screen display, key temperature adjustment, external independent power supply. In DC 19V 40W state, 15 seconds temperature rise to 300 ℃.

SQ-001 intelligent temperature control between 100-400 degrees, more stable temperature, instantaneous temperature rise, automatic sleep, over temperature alarm and other function

The heating end adopts internal heating core

Temperature stability range: ± 2%

External independent power supply: DC 5525 power interface, suitable for DC 24v notebook power supply, vehicle power supply and mobile power supply.

Micro USB interface: set temperature rise curve, user defined function key and upgrade function through parameter file.

Additional functions: application layer open source design. You can change the internal parameter settings according to your own needs to meet more and more performance needs of different customers.

Package includes :

1x SQ-001 Controller

1x Solder T

1x Hex Key

1x User Manuel

1x DC5525 XT60 Power Cable

1x Mini iron Stand Holder

FAQ: 1. Why the temperature of the new T12 / TS solder tis jump? Because the inside heating core of the new T12 solder tdid not go through the high temperature, so the first time to use will be a bit of temperature, generally without special treatment, the normal use of 1-2 days after the basic will not bounce. Such as the need to immediately effective, the general proposal to adjust the temperature to 380 -400, side of the solder tto the tof tin, burning 5-10 minutes after the shutdown, until the solder tof the cooling and then re-boot! (if 1 times no effect, then can be repeated 2-3 times). T12 is pulsating temperature warming, even if the display temperature is flashing, the tof the real temperature is completely stable. T12 jump temperature also are connected with the temperature control board of procedures, power of electrostatic and if it connect the ground. 2. What the problem of attention when we use the T12 / TS first time? T12 theating speed is very fast, when the new solder tconnect the electricity, it must be tinput immediately to the solder tip, for protection, due to heating up fast, just need 6-10 seconds, no have more time to you for preparetion. so the ant is prepare the itwhich will be welded, and finally boot power, and each welding gap or the end, should be more on the tin to protect and then shutdown, so it can avoid to tin the new sold tis difficult, especially the T12 ttype of iron, such as T12-I / T12-IL / T12-BL / T12-ILS and so on! 3.What are the precautions for using the T12 / TS tip? a. If can use low temperature, then do not high temperature: T12 / TS is constant temperature control, the general recommended working temperature control between 300 ~ 380, higher than 380  damage the coating of solder tand cut down the PTC life! b. Do not dry: the first time to use solder tip, should be wrapped while heating a layer of tin. If it's without work, at once shutdown! c. Diligent to clean: before shutting down, use a wet sponge or detin the ball to remove the tof the oxidation of debris, on the tin after the shutdown power off! d. Standard operation: Do not violent collision the solder tip, do not stamp the top of the hard objects, but can not be used to hot plastic and other materials, specifically reminded that friends like tin should avoid the iron and other hard metal knotin, the heating core of T12 is in the head of the solder tip, often percuion is a fatal damage to T12 / TS! e. Le use of scaling powder: scaling powder can not be used, can be used as le as poible! When scaling powder help make beautiful and reliable welding at the same time, but also greatly speed up the consumption the coating of the solder t, T12 heating core high temperature position is very near of the Nozzle tof the solder tip, Scaling powder in the fear of threat to T12 head preing parts.

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.