Stereo Bluetooth Power Amplifier Board 12V/24V High Power Digital Amplifier Module XY-P15W XY-P40W

Bluetooth 5.0 stereo audio power amplifier board 20Wx2

Bluetooth receiver DC 12~24V supply

Product Characteristic

Product Name

Bluetooth stereo audio power amplifier board

Product Model

XY-P15W

Supply voltage

DC: 8~24V

Bluetooth version

5.0

Connect distance

15 meters(visible)

Output mode

stereo

Output power(@1KHz)

16W*2@12V 4

10W*2@12V 8

15W*2@16V 8

20W*2@20V 8

30W*2@24V 8(cooling fin)

Speaker selected(30W~150W)

4(8~12V supply)

8(8~24V supply)

16(8~24V supply)

protection

Power re protection

Short circuit protection

Thermal protection

Application circuit

Size

Package

Operation specification

Supply the module, the blue LED is on, and it goes into Bluetooth mode;Waiting for pairing after playing the audio tone; Turn on phone Bluetooth,XY-P15Wwill be searched and display; Click the

XY-P15W,it will connect to the board. It connects succefully with an audio tone; After this you can play the music. The power amplifier board will prepare for the next pairing with an audio tone, When the Bluetooth is disconnected.

Connecting as the following ture.

Physical display

NOTE:

1.Keep 2 meters away from router to avoid WIFI interference

2.8~24VDC is recommended; upper than 26V, it will be damaged.

3.Driving 4load, power supply must be under 12V; and driving 8load, supply must be under 24V.

4.The supply current must be 2A at least.

5.If the module works upper 20W x 2, a cooling fin will be needed.

6.The line connecting speaker with module should be within one meter.

7.ESD protection, please release ESD on your hands before you contact the module.

8.30W and upper power speakers is recommended.

Fault Check

1.Check the power supply if the LED is not bright.

2.If the LED is on, but Bluetooth device XY-P15Wis not searched, check if the router is in the near, and keep away from the router.

3.The speaker tapped when power on.

1)Check that the speaker load is so small that the current through the speaker is enough for ch goes into DC protection. Try to lower the supply and restart.

2)Check that if the power supply is low that cannot drive the speaker. 2A power supply current is ok.

4.Floor noise in speaker when playing

1)Play another music to verify the noise is not related with music itself.

2)Replace the speaker to check If the noise is caused by speaker itself.

3)Replace the power supply to check If the noise is caused by unstable power.

5.It plays intermittently

1)Check if the temperature of the board is high, and it goes into thermal protection.

2)Check if the Bluetooth is unstable, adjust the angle between the connected device; And Check if a WIFI source is in the near.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.