Supply Electromagnetic Brake, Electromagnetic Clutch, Inner Bearing Shaft Clutch, Woodworking Machinery

Electromagnetic Clutch and Brake Action Principle Analysis:

The End of the Spline Shaft of Driving Shaft Is Equipped with Active Friction Plate, Which Can Move Freely along the Axial Direction. Due to the Connection of Integral Key, It Will Rotate Together with Driving Shaft. Driven Friction Plate and Active Friction Plate Are Alternately Stacked, and the Outer Edge of the Raised Part Is Stuck with the Driven Gear4Fixed in the Sleeve Together, So the Driven Friction Plate Can Follow the Driven Gear, and It Can Not Rotate When Rotating at Driving Shaft. When the Coil Is Powered on, the Friction Plate Is Sucked to the Iron Core, and the Stiff-Bit Is Also Sucked, Tightly Pressing Each Friction Plate. Depending on the Friction between the Main and Driven Friction Plates, the Driven Gear Rotates with the Driving Shaft. When the Coil Is Powered off, the Coil Spring Installed between the Internal and External Friction Plates Restores the Stiff-Bit and Friction Plates, and the Clutch Loses the Effect of Transmitting Torque. One End of the Coil Can Input Direct Current through Electric Brush and Sliding Bracelet, and the Other End Can Be Grounded.

Type Recognition: According to Different Structures, It Can Be Divided into Friction Plate Type Electromagnetic Clutch, Tooth Embedded Electromagnetic Device, Magnetic Powder Electromagnetic Device and Eddy Current Type Electromagnetic Clutch, Etc.

Electromagnetic clutch-Electromagnetic brake-Magnetic powder clutch--Powder Brake-Magnetic Powder Brake-Magnetic Powder

Fulong Electromagnetic Clutch and Electromagnetic Brake, Magnetic Powder Clutch, Magnetic Powder Brake--Film splitting machineHigh-speed slitting machineStrip cutting machineRewinderCompound machine

Dry Veneer Electromagnetic Clutch.Dry Veneer Electromagnetic Brake Is Widely Used for Mechanical Starting.Stop Use.Or Transmission Speed.The Purpose of Changing the Transmission Direction.

Inner Bearing Clutch
YS-CS-0.6 - YS-CS-1.5 - YS-CS-2.5 - YS-CS-5 - YS-CS-10 - YS-CS-20 - YS-CS-40 - YS-CS-75

Electromagnetic clutchYS-C- 0.6｜YS-C-1.5｜YS-C-2.5｜YS-C-5｜YS-C-10｜YS-C-20｜YS-C-40｜YS-C-75

Electromagnetic brakeYS-B-0.6｜YS-B-1.5｜YS-B-2.5｜YS-B-5｜YS-B-10｜YS-B-20｜YS-B-40｜YS-B-75

Miniature Electromagnetic Magnetic Powder ClutchYSC- 0.05-YSBC- 0.1-YSC-0.2-YSC-0.5｜YSC-010
Biaxial TypeMagnetic Powder SeparationCombinerYSC-0.6｜YSC-1.2｜YSC-2.5｜YSC-5｜YSC-10｜YSC-20｜YSC-40

Miniature Electromagnetic Magnetic Powder BrakeYSB-0.05-YSB-0.1-YSB-0.2-YSB-0.5｜YSB-010
Single AxisMagnetic PowderBrakeYSB-0.6｜YSB-1.2｜YSB-2.5｜YSB-5｜YSB-10｜YSB-20｜YSB-40
Magnetic Powder BrakeYSB-0.6｜YSB-1.2｜YSB-2.5｜YSB-5｜YSB-10｜YSB-20｜YSB-40