T12 75W Digital Iron Station Tips Welding Rework Station Temperature Adjustable Control sleep function T12 set1

T12 75W Digital StationTips Welding Rework Station  temperature adjustable control  microcontroller

NOTE:

NO power cable is included in packing to save your shipping cost.

you just need to use the normal power cable at your home.

Features:

Using STC15W408A5 microcontroller,

Use sGM855xN high precision op amp,

Fast heating speed

Accurate temperature control,

Regain temperature quickly,

User-friendly settings, diversified options can be set,

With NTC ambient temperature compensation,

Various protection and energy saving technologies,

With tips.

Data memory function

tand heating element integrated

tips can be replaced and change

Large SIZE LCD screen (screen SIZE: 28mmX28MM）

Specifications:

Temperature range :150--450 degree

power:75W

output voltage: 24V

Input voltage:100V-240V

Main unit Dimension: 152mm X 88mm X 45mm

Weight: about 930g

Length of handle: 18cm

Large Screen SIZE: 28mmX28MM

Normal use:

1. Under normal circumstances, turn on the heating mode when you turn it on. Rotate the temperature control on to adjust the temperature. After turning off, turn on again and automatically remember the temperature set at the last shutdown.

2. Under normal working conditions, short pre the encoder once to enter the temperature enhanced mode for temporary welding of large solder joints. When the temperature is enhanced, the ten decimal point fl quickly as a reminder. The enhanced temperature and time can be set in the menu. Automatically restore the set temperature.

3. Pre and hold the encoder slightly for about one second to enter the manual standby mode, the temperature drops to 200 degrees, piup the handle or the encoder will automatically restore the set temperature if there is any action

4. After manual standby, long pre the encoder for about one second to enter the soft shutdown mode. The digital tube displays OFF. When you piup the handle or the encoder, any action will automatically restore the set temperature.

5. The handle s during the welding proce, and the hundred decimal point will flash to show the vibration r action. 6. When not welding for a long time, the control panel will automatically wait for 200 degrees according to the menu setting time and then automatically shut down automatically. Raise the handle or turn the encoder to restore the set temperature.

Introduction for  heater:

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.