T12 STC-OLED Station iron DIY parts kits T12-952 Digital Temperature Controller iron with Metal case Set 4

The following are the discount coupons for Pod and Spain. When placing an order, you can enter the digital code of this coupon to make the corresponding deduction. Each customer can only use it once！

This product is QUICKO T12 DIY Kit, not HAKKO， you need to prepare a power supply and aemble the parts together by yourself. if you are not good at DIY, or if you know little about Electricity， please do not  buy this kits. We do not aume any responsibility for man-made damages. Thank you for your understanding.please make sure the positive and negative anodes connection were all right before testing. Wriong connection was  bound to a  red- situation. if it's happened,please che stent and aviation plug carefully,please conpared your connection with the datail steps in my store and try to  interchange the positive and negative wire,the machine will be OK.

T12 connection diagram Installed Note: 1. Strictly reference shop tutorials, well insulated and grounded against static electricity. 2. Before power test, carefully chethe wiring is correct, whether Weld and short, full power test machine after confirmation. 3. connect 12-24V DC, if received more than 20V power supply,2017 new style product don't need to remove anything! 4. When you configure the power supply voltage and current requirements thelves refer to the following table: Power (third column) is determined by the voltage (first column), as long as the current reaches the minimum current (second column). Measuring Machine normal, lights and display status: 1. Unplugged T12 tip, turn the light flashed off, show SER, 1 seconds after the display 500. 2. T12 plug tip, boot light uniform flashing, indicating rapid heating from room temperature generally show the set temperature to rise, approaching the set temperature, strobe lights. Indicator is not flashing or intermittent fl, indicating that the ttemperature reaches the set temperature or alternating temperature compensation. When measuring machines on display digital bounce questions: Because with the new T12 tip, the tinside the heater did not burnt, it will be just a little jump start with warm, generally do not need special treatment, the natural use of 1-2 days basically not bounce up. If you need effective immediately, the general recommendations of the temperature to 350C-380 Cwhile heating to the point of tin head, burning off after 4-5 minutes, until the tto cool before you can reboot! (1 no action can be repeated 2-3 times)

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.