T4A S1A ADT USB 3.1 Gen2 Type C To Type A Flat Ribbon Data Cable USB 3.1 USB~C~USB~A Male To Female USB~Device FPC Adapter

Brand name:ADT-LINK

Product name:USB 3.1 flat Cable

Product model:USTseries

Product name:USB3.1 USB-C to USB-A extension cable

Wire length:3cm-3m (the length can be customized)

Adaptation range:USB3.1 type-C to type-A

nsferspeed:support of increased up to 10Gbps (50cm Max.), 5Gbps (200cm Max.)

Current capacity:3A(Lengthwithin 50cm supports 3A, within 2m supports 1.5a)

Application: , ROCK Pi 4 raspberry Pi microcontroller development board, built-in USB device extension switch use, convenient for brushle head, steering engine head, small s head, SLR head USB power supply and AV nsmiion and so on

ADT USB series Part-Number Description:

Remark 1: Speed : 10G/bps high-speed support within 50cm, 5G/bps within 1 meter

Remark 2: Male to male TX-RX signal exchange; male to female TX-TX signal is directly connected,

Remark 3: T4A/T5A with chip, support USB3.1 positive and negative plug, both are 10G high speed

T4B/T5B does not have a chip, and also supports positive and negative insertion. The positive insertion can support USB3.1 high speed but the re insertion only supports USB2.0 low speed

ADT USB series Part-Number Description:

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the and the connector. For the wire length, please refer to the 5cm black arrow in the figure below.

Product advantages:Material advantages: use German patented ed wire, use high quality gold-plated connectors, high frequency support HDMI 2.0 stable nsfer. uses high-quality low-resistance high-quality materials, workmanship precision, uses high TG sheet, copper thickne is thickened to 1oz; connector gold-plated conductive performance, can reduce the black screen blue screen sp caused by increased oxidation rust resistance Flower screen problem.Design advantages:differential signal without via design, no CAF micro short circuit phenomenon, high speed signal data nsmiion without parasitic capacitance and parasitic inductance signal attenuation interference problem, power circuit enhanced wiring design, board miniaturization design, can reduce mechanism interference , no card hardware, product installation is easy.Production advantage:Our factory direct s, product customized production, welding at the metal welding point during production. And put on the heat-shrinkable tube protection, the product is firm and reliable, there will be no problem of disconnection and disconnection. The product works well, stable and reliable.

Q&A:

Is there any EMI shieldingfor Cable?

The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electroic interference shielding with conducting polymer to guard against incoming or outgoing emiions of electroic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

Can wires and connectors be split?

No, in order to purify the signal nsmiion and avoid the accident of wire falling off, our wire and connectors is and protected by the heat shrinkable tube sleeve, so the product can not be separated.

How compatible are wires?

Supports USB 3.0 high-speed,all of product test P 100% before shipping.

Real photos: