TC1 T7 T7-H Transistor TFT LCD Display ESR Diode Triode Capacitance Meter NPN PNP MOSFET

TC1 T7 T7-H Transistor TFT LCD Display ESR Diode Triode Capacitance Meter NPN PNP MOSFET

What's the difference between 3 versions?

T7 / TC1: color screen, two functions are the same! T7 is slightly faster! The TC1 screen is slightly larger and they are all powered by lithium batteries. In addition to measuring resistance, capacitance, inductance, diodes, MOS transistors, thyristors, it can also measure additional voltage regulators, infrared decoding (limited to for Hitachi format)

T7H: is an upgraded version of T7, Up-to-date / fastest version

LCR-TC1

Features: It can be widely used to detect  NPN and PNP transistor, , , diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc. It can also be used to detect  infrared wave forms. It also can detect  zener diode and has the function of  self-calibration. After detection, align the infrared e control with the "IR" light, then pre the on in the e control, if the detector succefully decode it, it will display the data code and infrared wave form. One on operation, automatically detect and shutdown, and you can pre the multi-functional on to close the detector too. Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. Not like the usual black and white display,  this detector will show results in color. Specifications: Display: 1.8 inch TFT Screen Diode Range:  < 4.5V Zener Diode:Transistor Detect Area:  0.01-4.5V Zener Diode Detect Area:  0.01-30V Triac Range:  IGT < 6mA Capacitance:  25pF-100mF :  0.01-50MΩ Inductance:  0.01mH-20H Battery: 0.1-4.5V Power Mode: Rechargeable Lithium Battery ( INCLUDED) Item Size: 8.8 x 8 x 2.8cm / 3.47 x 3.15 x 1.10in Item Weight: 111.5g / 3.94oz Package Size: 14.5 x 12 x 2.7cm / 5.71 x 4.73 x 1.06in Package Weight: 114g / 4.02oz

TCR-T7

1.1         Introduction

- 160x128 TFT display

- Multi function key

- Transistor test area

- Zener Diode test area

- IR receiver window

- Micro USB Charging Interface

- Charge indicator LED

1.1         Features

TC-V2.12k is a TFT graphic display Multifunction .

l         Transistor

-

-           Automatic detection of zener diode0.01-30V

-           Self test with automatic calibration

l         IR decoder

-           Support Hitachi IR coding

-           IR waveform display

-           Infrared receiving instruction

l         Other

-           Measurement results using TFT graphic display(160x128)

-           One key operation

-           Auto Power Off(Timeout Settable)

-           Built-in high capacity rechargeable Li-ion Battery

-           Li-ion Battery voltage detection

-           Support Chinese and English

Warning : Built-in Li-ion Battery, it is strictly prohibited the immersed in water, or near a heat source!

Warning : For your personal safety, please strictly comply with the use of Li-ion Battery specifications and precautions!

1          Operating Instructions 1.1         Key operational definitions

Multi-function key has two actions:

l         Short pre: Pre the key and not le than 10 ms, release key within 1.5 seconds

l         Long pre: Pre the key more than 1.5 seconds

1.2         Power on

In the power off state, short pre the multifunction key, the is turned on and automatically measured.

l         Power on & measurement interface

TC-T7-H

128x128 TFT display

Multi function key

Transistor test area

Zener Diode test area

IR receiver window

Micro USB Charging Interface

Charge indicator LED

Features: TC-T7-H  is a TFT graphic display Multifunction . Transistor : Automatic detection of NPN and PNP bolar transistors, N-channel and P-channel MOSFETs, JFETs, diodes (including double diodes), N- and P-IGBTs, s (including potentiometers), inductors, s, thyristors, triacs and battery (0.1-4.5V) Automatic detection of zener diode(0.01-20V) Self test with automatic calibration IR decoder: Support Hitachi IR coding IR waveform display Infrared receiving instruction Other: Measurement results using TFT graphic display(160x128) One key operation Auto Power Off(Timeout Settable) Built-in high capacity rechargeable Li-ion Battery Li-ion Battery voltage detection Support Chinese and English Performance : Multifunction can automatically identify elements and automatic detection of pin layout, and automatic switching range. The main performance are as follows:

Component

Range

Parameter Descrtion

BJT

-

hFE(DC Current Gain), Ube(Base-Emitter Voltage), Ic(Collector Current), Iceo(Collector Cut-off Current (IB=0)), Ices(Collector short Current), Uf(Forward Voltage of protecting diode) ③

Diode

Forward Voltage