Tire Pressure Monitor Sensor Car For Ford

Tire Pressure Monitor Sensor Car for Ford
For Ford brand car, in the replacement tire pressure sensor or tire pressure alarm or exchange tires, need to carry out tire pressure reset operation.

Instructions:
(1) Set the vehicle into the tire pressure training mode (plug the key, step on the parking brake, the car keys from the off to open 3 times, and then step on the parking brake, turn off the car keys, and then from the off to open three times; Training mode for the vehicle to start the state of the three consecutive dangerous alarm flash), if you hear the speaker sounded that the training mode has n enabled.

(2) Starting from the left front tire, the anten na of the dedicated tool for tire pressure monitoring is facing upwards against the tire sidewall near the rim of the valve stem to start the anten na. Press and release the start on and wait for the speaker to emit a chirp. Once the speaker is chirping, the sensor information is read and the turn signal to be read at the next will light.

(3) When the speaker is ringing and the right front turn signal light is on, the remaining three sensors repeat step (2) in the following order: 3.1. Right before 3.2. Right rear 3.3.Left rear.

(4) When the left rear sensor has n read and the speaker is also issued twice, the read process is completed and the body control module also exits the read mode.

Precautions:
(1) The new battery power lead to less than the standard launch power, after use, please charge about 2 hours.
(2) Is the of the anten na to the tires of the anten na, between the tires and the wheels near the gas core,not wore the gas core.

Appendix (for models):

2007-2014 for Ford F-150
2008-2015 for Ford F-250 F-350 F-450 F-550 r Duty
2007-2015 for Ford Mustang
2007-2014 for Ford Edge
2006-2015 for Ford Escape
2008-2015 for Ford Expedition
2006-2016 for Ford Explorer
2008-2015 for Ford Flex
2008-2015 for Ford Ta