TPA3116D2 2.1 Channel Power Amplifier Board 2X

TPA3116D2 2.1 Channel Power Amplifier Board 2X
1. TPA3116 series subwoofer high-fidelity 2.1 power amplifier board, onboard Bluetooth 5.0 chip, supports the installation of AUX (audio input) and USB (playing U disk and card reader), and can also be installed with IR (remote control function) and AD_KEY ( button control)!
2. USB can support all lossless format audio file playback (WAV FLAC APE WMA MP3, etc.) a variety of audio formats!
3. TPA3116D2 power amplifier board output power: 2*50W+100W4Ω, power supply is 24V8A. (Amplification gain is 36dB for subwoofer + 32dB for left and right channels)
4. The gain of the bass channel of the power amplifier board is 36dB. The output power is relatively large, please try to connect a subwoofer speaker with a size of 6.5 inches or more and 4 euros and below 100W!
5. The gain of the left and right channels is 32dB, and it can be connected to a 3-6.5 inch high and low frequency speaker power amplifier board within 8 ohms and 30W. The power supply requirements are 8-24V (8V can be turned on, not 8V power supply can reach 2*50+100W) 24V5A power supply above To achieve the best output value, (buyers who use power below 21V are not responsible for the output effect) please use a power supply above 24V5A!

Specification:
Product name: 2.1 channel bluetooth power amplifier board
Power amplifier chip: TPA3116D2*2
Bluetooth version: 5.0
Amplifier channel: 2.1 three-channel
Supply voltage: DC8V-24V
Supply current: 3A-10A
Output power: 2*50+100W
Output Impedance: 4 ohm
Amplification gain: 36db-32db
Distortion ratio: THD-1%
Product size: 96 x 40mm
Wide voltage power supply: 8V-24V DC power supply (can not be connected to a transformer)
Different voltage outputs different power: voltage X current = power (the conversion rate of this board is 90%)
The digital power amplifier voltage activated output current parameters are as follows:
8V power supply maximum 3A current = 24W (total power) 90%
12V power supply maximum 5A current = 60W (total power) 90%
18V power supply maximum 6A current = 108W (total power) 90%
24V power supply maximum 8A current = 192W (total power) 90%
That is to say, in the state of 8V power supply, the maximum current is 2A, that is, 3X8=24W and so on!
Colour:black+green
Material:PCB+Metal

Package Contents:
1 * 2.1 channel bluetooth power amplifier board

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !