Water Light 12V Pool s 36W 72W PAR 56 LED Underwater Light IP 68 Fountain Spotlights Multe Color With Remote

Notes need to be careful

1. Do not connect AC110V, AC230V, or any voltage greater than 12V to our lamp.2. Do not let the lamp CONTINUOUSLY on more than 10 minutes WITHOUT WATER, if not, it will be easier hot and get ed.3. Do not screws TOO TIGHT when fixing our lamp to niche.

Input voltage: 12V AC/DCLED Brand: SMD 3030 LEDWatt versions: 24W/36W/48W/60W/72WLumen: 24W=2280lm, 36W=3040lm, 48W=3800lm, 60W=3990lm, 72W=4200lmEqual to Halogen Watt: 24W=228W, 36W=304W, 48W=380W, 60W=399W, 72W=456WLamp body material: PlasticLamp dimension: D176xH96.6mmBattery for remote: 12V, 23A/27ALamp waterproof grade: IP68(can be put into water directly).Warranty: 2 YearsLife Span: 50000 hoursSolid color(single color): Warm White(2700-3500K), Pure White(5500-6300K), BlueMulte color: RGBW 2P with remote, RGBWW 2P with remote, RGBW 5P no remote, RGBWW 5P no remote

Knowledge

LED PAR56 is designed to rep Halogen PAR56 with following advantages:1. It fits your old Poolhousing(niche).2. Customers don't need to change the old niche, power cable and nsformer if they choose our single color and mute color in 2 pins versions.3. The lamp is using LED as light source, can help you save electricity bill.4. Our Lamp can work with AC12V and DC12V at the same time.5. RGBW=RGB+White, RGBWW=RGB+Warm white, they are multicolor, including red, green, blue, cyan, purple, yellow, white, and some dynamic modes.6. One remote can control 2 pieces or more quantity lamps, but better for you to connect AC12V nsformer if you want them synchronous(showing the same color).

Advantages of our lamps to other sup'.

1. Our multicolor lamp has memory and switch off/on functions.Memory means it can remenber its last color and start from the same when it is on next time.Switch off/on means customers can change lamp's color and mode by switching power off and on instead of remote.2. 2 Years warranty and better waterproof grade.3. Much more bright in the same watt.4. The remote for multicolor lamp is RF version instead of IR, which can control much more far, and easier to operate.

Packing

1. If you choose the lamp in single color(red/green/blue/pure white/warm white).*1 piece x PAR56 Pool Lamp2. If you choose RGBW 2P with remote, or RGBWW 2P with remote.*1 piece x PAR56 Pool Lamp*1 piece x Remote(battery is not included)3. If you choose RGBW 5P no remote, or RGBWW 5P no remote.*1 piece x PAR56 Pool Lamp

Dimension 01

This is for Pure white, Warm white, Blue, RGBW 2P with remote, RGBWW 2P with remote

Dimension 02

This is for RGBW 5P no remote, RGBWW 5P no remote.