XH-W3001 W3002 Water Cooler Temperature Controller 12V/24V/110V 220V Fridge Thermostat Switch Water Heating r for 12v fan

XH-W3001 W3002 Water Cooler Temperature Controller 12V/24V/110V 220V Fridge Thermostat Switch Water Heating r for 12v fan

XH-W3001

Product parameters

Product name: Microcomputer temperature controller

Product Model: XH-W3001

Supply voltage: 12/24/220V

Temperature measurement range: -50℃~110℃

Temperature control range: -50℃~110℃

Temperature control accuracy: 0.1℃

Load power: 120/240/1500W

Measurement input: NTC10K waterproof probe L=1 meter

output type: direct output

Output capacity: max 10A

Installation hole distance: 73mm (diameter 4mm)

Appearance size: 60*45*31mm

Instructions

To set the startup temperature:

Pre the up on once to display the startup temperature, pre and hold the up on for about 3 seconds, the startup temperature number will f, and the desired temperature value can be set by the up and down ons

Set stop temperature:

Pre the down on once to display the stop temperature, long pre the on for about 3 seconds, the stop temperature number will f, and the desired temperature value can be set by the up and down ons

reset:

When the power is on, pre and hold the up and down keys at the same time, the digital tube displays 888 and then automatically jumps to the detection temperature, that is, restores the factory settings

Product List:

Thermostat X1

XH-W3002

product information:

Product name: Microcomputer temperature controller

Product Model:XH-W3002

Temperature measurement range: -50~110℃

Temperature control range: -50~110℃

Temperature measurement accuracy: ±0.2℃

Temperature control accuracy: ±0.1℃

Measurement input: NTC10K L=1 meter waterproof probe

Input power: 12/24/220V

Output power: 120/240/1500W

output type: direct output

Output capacity: max 10A

Installation hole distance: 73mm (diameter 4mm)

Appearance size: 60*45*31mm

Use settings:

Code and function introduction

P0 set startup temperature

Pre the setting on once to enter the internal menu, the default display is P0, pre the setting on again, and set the required startup temperature by preing the up and down ons.

P1 set stop temperature

Pre the setting on once to enter the internal menu, the digital display is P0, switch to P1 by preing the up and down ons, pre the setting on again, and set the desired stop temperature by preing the up and down ons.

P2 Set temperature correction

Enter the internal menu in the same way, switch to P2 by preing the up and down ons, pre the setting on again, and set the required calibration temperature by preing the up and down ons. In the setting, if the detected temperature value is 0.5°C higher than the actual temperature value, the calibration temperature to be set is -0.5°C. If the detected temperature value is 1°C lower than the actual temperature value, the calibration temperature to be set is 1°C. Detected temperature±corrected temperature=actual temperature.

P3 set delay start

Enter the internal menu in the same way, switch to P3 by preing the up and down keys, pre the setting key again, and set the required delay time (unit is minutes) by preing the up and down keys. Delay start is generally used for compreor refrigeration. If it is used for refrigerator freezers, this value needs to be set. According to the size of the compreor back preure, the general setting value is 3-6 minutes. If you are not used to control the compreor or do not need delay time function, sk this item directly.

Product List:

Thermostat X1

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.