Gilbert Elizabeth For Raspberry Pi Pico LORA Node Expansion Board SX1262 863-870MHz Expansion Board Module Support LoRaWAN Protocol

Onboard Raspberry Pi Pico interface, suitable for Raspberry Pi Pico series motherboards
Support LoRaWAN protocol, applicable to a wide range of frequency bands
Active temperature-compensated crystal oscillator is used to ensure long-term stable operation in high and low temperature harsh environments
Support FSK, GFSK, LoRa modulation, excellent anti-blocking and ultra-long-distance communication characteristics
Onboard PH1.25 battery holder and charging IC, which can be connected to lithium battery for charging and discharging

High receive sensitivity down to -148 dBm and programmable transmit power up to 22dBm
Supports preamble detection, with CRC, up to 256 bytes packet engine
RF chip:SX1262
Transmission power:22dBm
Transmit current:107mA@22dBm
Receive current:5.3mA@125KHz
Signal modulation:LoRa/(G)FSK
Operating voltage:3.3V
Communication interface:SPI
Working temperature:-40 - 85℃
Rechargeable lithium battery:3.7V 600mAh
Working frequency band:868M(863-870MHz)
Colour:Blue
Material:PCB

Package Contents:
1 * Expansion Board
1 * Lithium Battery
1 * Antenna
1 * IPEX1 Generation To SMA Conversion Cable

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.