Minelab PRO-FIND 35 Pinpointer Metal Detector

Brand:   MINELAB

Color:   Yellow/Black

Batteries Required?         Yes

Material:           Metal

Power Source:    Air Powered

Item Weight:      0.4 Pounds

Battery: 9V PP3 (included)

Minelab PRO-FIND 35 Pinpointer metal detector

Designed for expert detectorists, our advanced pinpointer features Ferrous Tone ID and adjustable sensitivity.

Designed for the expert detectorist, the PRO-FIND 35 is our advanced performance pinpointer. Featuring Ferrous Tone ID, adjustable sensitivity, built-in LED light, and audibl & target identification, it is an essential tool for finishing the find.

WATERPROOF DESIGN:

Full waterproof housing allows this pinpointer to be effectively used on beaches, riverbeds and wet soil.

 

DIF TECHNOLOGY:

Detector Interference Free (DIF) technology reduces interference with an operating metal detector.

 

FERROUS TONE ID:

Two different responses help distinguish ferrous junk from nonferrous treasure. It adds another layer of performance…even with non-discriminating detectors.

 

5 SENSITIVITY LEVELS:

Adjust sensitivity to maximize depth, minimize noise and accommodate all ground conditions.

Technical Specifications

Target IdentificationFerrous Tone IDSensitivityAdjustable (5 levels)WaterproofWaterproof to 3 m (10-ft)Audio IndicationOn, OffVibration indicationYesLED FlashlightYesBattery9V PP3 (included)Battery Life30 hours nominalLength237 mm (9.3")Weight193 g (6.82 oz)AccessoriesHolster, LanyardAvailabilityNot all PRO-FIND models are available in all regions. Please contact your local dealer for more information.

• WATERPROOF DESIGN: Full waterproof housing allows this pinpointer to be effectively used on beaches, riverbeds and wet soil.
• DIF TECHNOLOGY: Detector Interference Free (DIF) technology reduces interference with an operating metal detector.
• FERROUS TONE ID: Two different responses help distinguish ferrous junk from nonferrous treasure. It adds another layer of performance…even with non-discriminating detectors.
• 5 SENSITIVITY LEVELS: Adjust sensitivity to maximize depth, minimize noise and accommodate all ground conditions.
• AUDIO & VIBRATION INDICATION: Intensifying vibrations accompany increasing audio tones as the pinpointer probe approaches the target, ensuring you never miss a hit.

I have detected for 30+ years without a pinpointer. This is not an essential piece of gear but is helpful for small targets or muddy conditions. This one is very simple to operate. I am not sure the discrimination feature is needed since my detector takes care of that most times. It is a little chirpy in mineralized soil if sensitivity is set too high.
On shallow targets the pinpointer saves me from digging a large plug. The trend seems to be to pinpoint less, dig larger plugs, then use pinpointer to find target. The vibration and volume are easily perceived. If you like, you can turn off the sound. I will write again after I have used it for a few months and several trips.
I lost first pointer. I now have a second one. I attached a 1/2 “ stainless split ring to the hole in cap and hooked a key retractor to that. Now it stays hooked to my belt loop. I can use it without removing it. I won’t walk away from it. The rings were from io tags LLC (on Amazon) and the retractor was from Key-Bak (on Amazon.
Addendum: Now Nov 2021. This pinpointer has held up fantastically. I use a tip protector that I found on e_Bay as I tend to “root around” with it a great deal. I think a key to dependable functioning is to turn sensitivity down a notch or two from max. No leakage from water. Battery life is excellent.
I still like my key retractor set up as well.