RISC/Milk-V Duo Development Board Kit for IoT Enthusiasts

Detailed Information About The Product:

[Product Introduction]Milk-V Duo is an MPU developed based on CVITEK CV1800B chip that can run LINUX and RTOS. Milk-V Duo provides professionals, industrial OEMs, IoT enthusiasts, hobbyists, DIYers a reliable, low-cost and extremely capable platform for building and tinkering with their ideas, helping them become Reality.
processor: 1GHz and 70OMHZ RISC-V C906 processor.Integrate CVITEK TPU to realize intelligent detection.Support H.264/H.265 video encoding, up to 2880x1620@20fps.Compatible with HD CMOS sensors.Programmable frequency output for sensor clock.Comprehensive ISP features for image optimization.Some OpenCV libraries support CV hardware acceleration.16-bit audio codec with built-in microphone input and output.Flexible network configuration with 1 Ethernet PHY
CSI-2 (MIPI Serial Camera): With 16-pin FPC interface for 2-wire MIPI camera input; Operate l2C, CLK and RST signals at 1.8V voltage level
Ethernet: Milk-V Duo includes CV1800B chip and 100Mbps physical layer; PHY connected to 5-pin pad; Ethernet use requires external transformer and RJ45 socket
USB interface: Compatible with USB 2.0, backward compatible with USB 1.1; Support for various speed modes, host/device capabilities and transports.USB: 1 Type-C for data and power, 1 USB2 pad; note: Please note that due to different batches, there may be differences in the appearance, color, and printing of the product, which will not affect its use

GPIOs: Up to 26 GPIO pins on the MilkV Duo 40-pin header to access internal peripherals such as SDIO, I2C, PWM, , J-TAG, and UART.
Up to 3xI2C/5xUART/1xSDIO1/1x/2xADC/7xPWM/1xRUN/1xJTAG
protocol: Scalable interface via USB hub (up to 127 devices)
Power saving mode, support HID devices
USB with configurable software
USB Type-C for accessing storage media
Micro-SD: SDIO 0 is compatible with the Secure Digital Storage (SD3.0) protocol
Board Specifications:
Single-sided PCB
Type-C port located on the top edge
Dual Slotted/Through Hole Headers Around Remaining Edge
Available as surface mount modules or in dual in-line package (DIP) format
40 primary user pins on 2.54mm (0.1inch) pitch grid with 1mm holes
Compatible with for veroboard and breadboard
Product parameters:
Processor: CVITEK CV1800B (906@1GHz; 906@700MHz)
Memory: DDR2 64MB
Storage: 1 Mirco-SD slot, 1 SD NAND pad
Camera: 1 16P FPC socket (MIPI CSI 2 channels)
GPIO: 26 pins available for general purpose I/O (GPIO)
Size: 21mm x 51mm
Material: PCB
colour: multicolor
Note: multicolorly colored. Cannot be chosen the specific color.

Package Contents:
1 x Milk V Duo(multicolor, Cannot be chosen the specific color.)
1 x Breadboard
2 x Row bus
1 x Data cable
2 x Pin arrangement
1 x STC Downloader Cable(CH340G USB to serial UART TTL)

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !